3.4-stable review patch. If anyone has any objections, please let me know. ------------------ From: Ivan Vecera <ivecera@xxxxxxxxxx> The patch fixes a problem with dropped jumbo frames after usage of 'ethtool -G ... rx'. Scenario: 1. ip link set eth0 up 2. ethtool -G eth0 rx N # <- This zeroes rx-jumbo 3. ip link set mtu 9000 dev eth0 The ethtool command set rx_jumbo_pending to zero so any received jumbo packets are dropped and you need to use 'ethtool -G eth0 rx-jumbo N' to workaround the issue. The patch changes the logic so rx_jumbo_pending value is changed only if jumbo frames are enabled (MTU > 1500). Signed-off-by: Ivan Vecera <ivecera@xxxxxxxxxx> Acked-by: Michael Chan <mchan@xxxxxxxxxxxx> Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/net/ethernet/broadcom/tg3.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -10861,7 +10861,9 @@ static int tg3_set_ringparam(struct net_ if (tg3_flag(tp, MAX_RXPEND_64) && tp->rx_pending > 63) tp->rx_pending = 63; - tp->rx_jumbo_pending = ering->rx_jumbo_pending; + + if (tg3_flag(tp, JUMBO_RING_ENABLE)) + tp->rx_jumbo_pending = ering->rx_jumbo_pending; for (i = 0; i < tp->irq_max; i++) tp->napi[i].tx_pending = ering->tx_pending; -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html