From: Vinod Koul <vkoul@xxxxxxxxxx> [ Upstream commit 1dee9e3b0997fef7170f7ea2d8eab47d0cd334d8 ] Some node unit addresses were put wrongly in the dts, resulting in below warning when run with W=1 arch/arm64/boot/dts/qcom/sm8350.dtsi:693.34-702.5: Warning (simple_bus_reg): /soc@0/thermal-sensor@c222000: simple-bus unit address format error, expected "c263000" arch/arm64/boot/dts/qcom/sm8350.dtsi:704.34-713.5: Warning (simple_bus_reg): /soc@0/thermal-sensor@c223000: simple-bus unit address format error, expected "c265000" arch/arm64/boot/dts/qcom/sm8350.dtsi:1180.32-1185.5: Warning (simple_bus_reg): /soc@0/interconnect@90e0000: simple-bus unit address format error, expected "90c0000" Fix by correcting to the correct address as given in reg node Reviewed-by: Robert Foss <robert.foss@xxxxxxxxxx> Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx> Link: https://lore.kernel.org/r/20210513060733.382420-1-vkoul@xxxxxxxxxx Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sm8350.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index ed0b51bc03ea..a2382eb8619b 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -689,7 +689,7 @@ pdc: interrupt-controller@b220000 { interrupt-controller; }; - tsens0: thermal-sensor@c222000 { + tsens0: thermal-sensor@c263000 { compatible = "qcom,sm8350-tsens", "qcom,tsens-v2"; reg = <0 0x0c263000 0 0x1ff>, /* TM */ <0 0x0c222000 0 0x8>; /* SROT */ @@ -700,7 +700,7 @@ tsens0: thermal-sensor@c222000 { #thermal-sensor-cells = <1>; }; - tsens1: thermal-sensor@c223000 { + tsens1: thermal-sensor@c265000 { compatible = "qcom,sm8350-tsens", "qcom,tsens-v2"; reg = <0 0x0c265000 0 0x1ff>, /* TM */ <0 0x0c223000 0 0x8>; /* SROT */ @@ -1176,7 +1176,7 @@ usb_2_ssphy: phy@88ebe00 { }; }; - dc_noc: interconnect@90e0000 { + dc_noc: interconnect@90c0000 { compatible = "qcom,sm8350-dc-noc"; reg = <0 0x090c0000 0 0x4200>; #interconnect-cells = <1>; -- 2.30.2
