[PATCH 5.12 660/700] serial: mvebu-uart: do not allow changing baudrate when uartclk is not available

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Pali Rohár <pali@xxxxxxxxxx>

[ Upstream commit ecd6b010d81f97b06b2f64d2d4f50ebf5acddaa9 ]

Testing mvuart->clk for non-error is not enough as mvuart->clk may contain
valid clk pointer but when clk_prepare_enable(mvuart->clk) failed then
port->uartclk is zero.

When mvuart->clk is not available then port->uartclk is zero too.

Parent clock rate port->uartclk is needed to calculate UART clock divisor
and without it is not possible to change baudrate.

So fix test condition when it is possible to change baudrate.

Signed-off-by: Pali Rohár <pali@xxxxxxxxxx>
Fixes: 68a0db1d7da2 ("serial: mvebu-uart: add function to change baudrate")
Link: https://lore.kernel.org/r/20210624224909.6350-3-pali@xxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/tty/serial/mvebu-uart.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c
index 908a4ac6b5a7..9638ae6aae79 100644
--- a/drivers/tty/serial/mvebu-uart.c
+++ b/drivers/tty/serial/mvebu-uart.c
@@ -445,12 +445,11 @@ static void mvebu_uart_shutdown(struct uart_port *port)
 
 static int mvebu_uart_baud_rate_set(struct uart_port *port, unsigned int baud)
 {
-	struct mvebu_uart *mvuart = to_mvuart(port);
 	unsigned int d_divisor, m_divisor;
 	u32 brdv, osamp;
 
-	if (IS_ERR(mvuart->clk))
-		return -PTR_ERR(mvuart->clk);
+	if (!port->uartclk)
+		return -EOPNOTSUPP;
 
 	/*
 	 * The baudrate is derived from the UART clock thanks to two divisors:
-- 
2.30.2






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux