From: Oliver Lang <Oliver.Lang@xxxxxxxxxxxxxxxxxxx>
commit 421a26f3d7a7c3ca43f3a9dc0f3cb0f562d5bd95 upstream.
The ltr559 chip uses only the lowest bit of the ALS_CONTR register to
configure between active and stand-by mode. In the original driver
BIT(1) is used, which does a software reset instead.
This patch fixes the problem by using BIT(0) as als_mode_active for
the ltr559 chip.
Fixes: 8592a7eefa54 ("iio: ltr501: Add support for ltr559 chip")
Signed-off-by: Oliver Lang <Oliver.Lang@xxxxxxxxxxxxxxxxxxx>
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
Tested-by: Nikita Travkin <nikita@xxxxxxx> # ltr559
Link: https://lore.kernel.org/r/20210610134619.2101372-3-mkl@xxxxxxxxxxxxxx
Cc: <Stable@xxxxxxxxxxxxxxx>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/iio/light/ltr501.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/iio/light/ltr501.c
+++ b/drivers/iio/light/ltr501.c
@@ -1208,7 +1208,7 @@ static struct ltr501_chip_info ltr501_ch
.als_gain_tbl_size = ARRAY_SIZE(ltr559_als_gain_tbl),
.ps_gain = ltr559_ps_gain_tbl,
.ps_gain_tbl_size = ARRAY_SIZE(ltr559_ps_gain_tbl),
- .als_mode_active = BIT(1),
+ .als_mode_active = BIT(0),
.als_gain_mask = BIT(2) | BIT(3) | BIT(4),
.als_gain_shift = 2,
.info = <r501_info,
