From: Linus Walleij <linus.walleij@xxxxxxxxxx> commit 7749510c459c10c431d746a4749e7c9cf2899156 upstream. The Ux500 HREF LEDs have not been probing properly for a while as this was introduce: ret = of_property_read_u32(np, "color", &led_color); if (ret) return ret; Since the device tree did not define the new invented color attribute, probe was failing. Define color attributes for the LEDs so they work again. Link: https://lore.kernel.org/r/20210613123356.880933-1-linus.walleij@xxxxxxxxxx Fixes: 92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx") Cc: stable@xxxxxxxxxxxxxxx Cc: Dan Murphy <dmurphy@xxxxxx> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> Signed-off-by: Olof Johansson <olof@xxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- arch/arm/boot/dts/ste-href.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -4,6 +4,7 @@ */ #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> #include "ste-href-family-pinctrl.dtsi" / { @@ -64,17 +65,20 @@ reg = <0>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; + color = <LED_COLOR_ID_BLUE>; linux,default-trigger = "heartbeat"; }; chan@1 { reg = <1>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; + color = <LED_COLOR_ID_BLUE>; }; chan@2 { reg = <2>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; + color = <LED_COLOR_ID_BLUE>; }; }; lp5521@34 { @@ -88,16 +92,19 @@ reg = <0>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; + color = <LED_COLOR_ID_BLUE>; }; chan@1 { reg = <1>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; + color = <LED_COLOR_ID_BLUE>; }; chan@2 { reg = <2>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; + color = <LED_COLOR_ID_BLUE>; }; }; bh1780@29 {