This is a note to let you know that I've just added the patch titled
drm/i915/sdvo: clean up connectors on intel_sdvo_init() failures
to the 3.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
drm-i915-sdvo-clean-up-connectors-on-intel_sdvo_init-failures.patch
and it can be found in the queue-3.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 8a3a3f4a507d46b1c22c923733b172eebcf188f1 Mon Sep 17 00:00:00 2001
From: Jani Nikula <jani.nikula@xxxxxxxxx>
Date: Mon, 12 Nov 2012 18:31:35 +0200
Subject: drm/i915/sdvo: clean up connectors on intel_sdvo_init() failures
From: Jani Nikula <jani.nikula@xxxxxxxxx>
commit d0ddfbd3d1346c1f481ec2289eef350cdba64b42 upstream.
Any failures in intel_sdvo_init() after the intel_sdvo_setup_output() call
left behind ghost connectors, attached (with a dangling pointer) to the
sdvo that has been cleaned up and freed. Properly destroy any connectors
attached to the encoder.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=46381
CC: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
Tested-by: bjo@xxxxxxxxxxxxx
[danvet: added a comment to explain why we need to clean up connectors
even when sdvo_output_setup fails.]
Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
Cc: Weng Meiling <wengmeiling.weng@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/intel_sdvo.c | 22 +++++++++++++++++++---
1 file changed, 19 insertions(+), 3 deletions(-)
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -2265,6 +2265,18 @@ intel_sdvo_output_setup(struct intel_sdv
return true;
}
+static void intel_sdvo_output_cleanup(struct intel_sdvo *intel_sdvo)
+{
+ struct drm_device *dev = intel_sdvo->base.base.dev;
+ struct drm_connector *connector, *tmp;
+
+ list_for_each_entry_safe(connector, tmp,
+ &dev->mode_config.connector_list, head) {
+ if (intel_attached_encoder(connector) == &intel_sdvo->base)
+ intel_sdvo_destroy(connector);
+ }
+}
+
static bool intel_sdvo_tv_create_property(struct intel_sdvo *intel_sdvo,
struct intel_sdvo_connector *intel_sdvo_connector,
int type)
@@ -2583,7 +2595,8 @@ bool intel_sdvo_init(struct drm_device *
intel_sdvo->caps.output_flags) != true) {
DRM_DEBUG_KMS("SDVO output failed to setup on SDVO%c\n",
IS_SDVOB(sdvo_reg) ? 'B' : 'C');
- goto err;
+ /* Output_setup can leave behind connectors! */
+ goto err_output;
}
/* Only enable the hotplug irq if we need it, to work around noisy
@@ -2596,12 +2609,12 @@ bool intel_sdvo_init(struct drm_device *
/* Set the input timing to the screen. Assume always input 0. */
if (!intel_sdvo_set_target_input(intel_sdvo))
- goto err;
+ goto err_output;
if (!intel_sdvo_get_input_pixel_clock_range(intel_sdvo,
&intel_sdvo->pixel_clock_min,
&intel_sdvo->pixel_clock_max))
- goto err;
+ goto err_output;
DRM_DEBUG_KMS("%s device VID/DID: %02X:%02X.%02X, "
"clock range %dMHz - %dMHz, "
@@ -2621,6 +2634,9 @@ bool intel_sdvo_init(struct drm_device *
(SDVO_OUTPUT_TMDS1 | SDVO_OUTPUT_RGB1) ? 'Y' : 'N');
return true;
+err_output:
+ intel_sdvo_output_cleanup(intel_sdvo);
+
err:
drm_encoder_cleanup(&intel_encoder->base);
i2c_del_adapter(&intel_sdvo->ddc);
Patches currently in stable-queue which might be from jani.nikula@xxxxxxxxx are
queue-3.4/drm-i915-sdvo-clean-up-connectors-on-intel_sdvo_init-failures.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html