From: Bean Huo <beanhuo@xxxxxxxxxx> commit 70b52f09080565030a530a784f1c9948a7f48ca3 upstream. According to the eMMC Spec: "When command queuing is enabled (CMDQ Mode En bit in CMDQ_MODE_EN field is set to ‘1’) class 11 commands are the only method through which data transfer tasks can be issued. Existing data transfer commands, namely CMD18/CMD17 and CMD25/CMD24, are not supported when command queuing is enabled." which means if CMDQ is enabled, the FFU commands will not be supported. To fix this issue, just simply disable CMDQ on the ioctl path, and re-enable CMDQ once ioctl request is completed. Tested-by: Michael Brunner <Michael.Brunner@xxxxxxxxxxx> Signed-off-by: Bean Huo <beanhuo@xxxxxxxxxx> Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx> Fixes: 1e8e55b67030 (mmc: block: Add CQE support) Cc: stable@xxxxxxxxxxxxxxx Link: https://lore.kernel.org/r/20210504203209.361597-1-huobean@xxxxxxxxx Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/mmc/core/block.c | 8 ++++++++ 1 file changed, 8 insertions(+) --- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -1053,6 +1053,12 @@ static void mmc_blk_issue_drv_op(struct switch (mq_rq->drv_op) { case MMC_DRV_OP_IOCTL: + if (card->ext_csd.cmdq_en) { + ret = mmc_cmdq_disable(card); + if (ret) + break; + } + fallthrough; case MMC_DRV_OP_IOCTL_RPMB: idata = mq_rq->drv_op_data; for (i = 0, ret = 0; i < mq_rq->ioc_count; i++) { @@ -1063,6 +1069,8 @@ static void mmc_blk_issue_drv_op(struct /* Always switch back to main area after RPMB access */ if (rpmb_ioctl) mmc_blk_part_switch(card, 0); + else if (card->reenable_cmdq && !card->ext_csd.cmdq_en) + mmc_cmdq_enable(card); break; case MMC_DRV_OP_BOOT_WP: ret = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BOOT_WP,
