From: Hans de Goede <hdegoede@xxxxxxxxxx> [ Upstream commit 5a6f0dbe621a5c20dc912ac474debf9f11129e03 ] Move the DMI quirks for upside-down mounted Goodix touchscreens from drivers/input/touchscreen/goodix.c to drivers/platform/x86/touchscreen_dmi.c, where all the other x86 touchscreen quirks live. Note the touchscreen_dmi.c code attaches standard touchscreen device-properties to an i2c-client device based on a combination of a DMI match + a device-name match. I've verified that the: Teclast X98 Pro, WinBook TW100 and WinBook TW700 uses an ACPI devicename of "GDIX1001:00" based on acpidumps and/or dmesg output available on the web. This patch was tested on a Teclast X89 tablet. Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> Link: https://lore.kernel.org/r/20210504185746.175461-2-hdegoede@xxxxxxxxxx Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/input/touchscreen/goodix.c | 52 ------------------------ drivers/platform/x86/touchscreen_dmi.c | 56 ++++++++++++++++++++++++++ 2 files changed, 56 insertions(+), 52 deletions(-) diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index c682b028f0a2..4f53d3c57e69 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -178,51 +178,6 @@ static const unsigned long goodix_irq_flags[] = { IRQ_TYPE_LEVEL_HIGH, }; -/* - * Those tablets have their coordinates origin at the bottom right - * of the tablet, as if rotated 180 degrees - */ -static const struct dmi_system_id rotated_screen[] = { -#if defined(CONFIG_DMI) && defined(CONFIG_X86) - { - .ident = "Teclast X89", - .matches = { - /* tPAD is too generic, also match on bios date */ - DMI_MATCH(DMI_BOARD_VENDOR, "TECLAST"), - DMI_MATCH(DMI_BOARD_NAME, "tPAD"), - DMI_MATCH(DMI_BIOS_DATE, "12/19/2014"), - }, - }, - { - .ident = "Teclast X98 Pro", - .matches = { - /* - * Only match BIOS date, because the manufacturers - * BIOS does not report the board name at all - * (sometimes)... - */ - DMI_MATCH(DMI_BOARD_VENDOR, "TECLAST"), - DMI_MATCH(DMI_BIOS_DATE, "10/28/2015"), - }, - }, - { - .ident = "WinBook TW100", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "WinBook"), - DMI_MATCH(DMI_PRODUCT_NAME, "TW100") - } - }, - { - .ident = "WinBook TW700", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "WinBook"), - DMI_MATCH(DMI_PRODUCT_NAME, "TW700") - }, - }, -#endif - {} -}; - static const struct dmi_system_id nine_bytes_report[] = { #if defined(CONFIG_DMI) && defined(CONFIG_X86) { @@ -1123,13 +1078,6 @@ static int goodix_configure_dev(struct goodix_ts_data *ts) ABS_MT_POSITION_Y, ts->prop.max_y); } - if (dmi_check_system(rotated_screen)) { - ts->prop.invert_x = true; - ts->prop.invert_y = true; - dev_dbg(&ts->client->dev, - "Applying '180 degrees rotated screen' quirk\n"); - } - if (dmi_check_system(nine_bytes_report)) { ts->contact_size = 9; diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c index bde740d6120e..b452865da2a1 100644 --- a/drivers/platform/x86/touchscreen_dmi.c +++ b/drivers/platform/x86/touchscreen_dmi.c @@ -299,6 +299,23 @@ static const struct ts_dmi_data estar_beauty_hd_data = { .properties = estar_beauty_hd_props, }; +/* Generic props + data for upside-down mounted GDIX1001 touchscreens */ +static const struct property_entry gdix1001_upside_down_props[] = { + PROPERTY_ENTRY_BOOL("touchscreen-inverted-x"), + PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), + { } +}; + +static const struct ts_dmi_data gdix1001_00_upside_down_data = { + .acpi_name = "GDIX1001:00", + .properties = gdix1001_upside_down_props, +}; + +static const struct ts_dmi_data gdix1001_01_upside_down_data = { + .acpi_name = "GDIX1001:01", + .properties = gdix1001_upside_down_props, +}; + static const struct property_entry gp_electronic_t701_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 960), PROPERTY_ENTRY_U32("touchscreen-size-y", 640), @@ -1330,6 +1347,16 @@ const struct dmi_system_id touchscreen_dmi_table[] = { DMI_MATCH(DMI_BOARD_NAME, "X3 Plus"), }, }, + { + /* Teclast X89 (Windows version / BIOS) */ + .driver_data = (void *)&gdix1001_01_upside_down_data, + .matches = { + /* tPAD is too generic, also match on bios date */ + DMI_MATCH(DMI_BOARD_VENDOR, "TECLAST"), + DMI_MATCH(DMI_BOARD_NAME, "tPAD"), + DMI_MATCH(DMI_BIOS_DATE, "12/19/2014"), + }, + }, { /* Teclast X98 Plus II */ .driver_data = (void *)&teclast_x98plus2_data, @@ -1338,6 +1365,19 @@ const struct dmi_system_id touchscreen_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "X98 Plus II"), }, }, + { + /* Teclast X98 Pro */ + .driver_data = (void *)&gdix1001_00_upside_down_data, + .matches = { + /* + * Only match BIOS date, because the manufacturers + * BIOS does not report the board name at all + * (sometimes)... + */ + DMI_MATCH(DMI_BOARD_VENDOR, "TECLAST"), + DMI_MATCH(DMI_BIOS_DATE, "10/28/2015"), + }, + }, { /* Trekstor Primebook C11 */ .driver_data = (void *)&trekstor_primebook_c11_data, @@ -1413,6 +1453,22 @@ const struct dmi_system_id touchscreen_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "VINGA Twizzle J116"), }, }, + { + /* "WinBook TW100" */ + .driver_data = (void *)&gdix1001_00_upside_down_data, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "WinBook"), + DMI_MATCH(DMI_PRODUCT_NAME, "TW100") + } + }, + { + /* WinBook TW700 */ + .driver_data = (void *)&gdix1001_00_upside_down_data, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "WinBook"), + DMI_MATCH(DMI_PRODUCT_NAME, "TW700") + }, + }, { /* Yours Y8W81, same case and touchscreen as Chuwi Vi8 */ .driver_data = (void *)&chuwi_vi8_data, -- 2.30.2
