From: Petr Mladek <pmladek@xxxxxxxx>
commit 5fa54346caf67b4b1b10b1f390316ae466da4d53 upstream.
The system might hang with the following backtrace:
schedule+0x80/0x100
schedule_timeout+0x48/0x138
wait_for_common+0xa4/0x134
wait_for_completion+0x1c/0x2c
kthread_flush_work+0x114/0x1cc
kthread_cancel_work_sync.llvm.16514401384283632983+0xe8/0x144
kthread_cancel_delayed_work_sync+0x18/0x2c
xxxx_pm_notify+0xb0/0xd8
blocking_notifier_call_chain_robust+0x80/0x194
pm_notifier_call_chain_robust+0x28/0x4c
suspend_prepare+0x40/0x260
enter_state+0x80/0x3f4
pm_suspend+0x60/0xdc
state_store+0x108/0x144
kobj_attr_store+0x38/0x88
sysfs_kf_write+0x64/0xc0
kernfs_fop_write_iter+0x108/0x1d0
vfs_write+0x2f4/0x368
ksys_write+0x7c/0xec
It is caused by the following race between kthread_mod_delayed_work()
and kthread_cancel_delayed_work_sync():
CPU0 CPU1
Context: Thread A Context: Thread B
kthread_mod_delayed_work()
spin_lock()
__kthread_cancel_work()
spin_unlock()
del_timer_sync()
kthread_cancel_delayed_work_sync()
spin_lock()
__kthread_cancel_work()
spin_unlock()
del_timer_sync()
spin_lock()
work->canceling++
spin_unlock
spin_lock()
queue_delayed_work()
// dwork is put into the worker->delayed_work_list
spin_unlock()
kthread_flush_work()
// flush_work is put at the tail of the dwork
wait_for_completion()
Context: IRQ
kthread_delayed_work_timer_fn()
spin_lock()
list_del_init(&work->node);
spin_unlock()
BANG: flush_work is not longer linked and will never get proceed.
The problem is that kthread_mod_delayed_work() checks work->canceling
flag before canceling the timer.
A simple solution is to (re)check work->canceling after
__kthread_cancel_work(). But then it is not clear what should be
returned when __kthread_cancel_work() removed the work from the queue
(list) and it can't queue it again with the new @delay.
The return value might be used for reference counting. The caller has
to know whether a new work has been queued or an existing one was
replaced.
The proper solution is that kthread_mod_delayed_work() will remove the
work from the queue (list) _only_ when work->canceling is not set. The
flag must be checked after the timer is stopped and the remaining
operations can be done under worker->lock.
Note that kthread_mod_delayed_work() could remove the timer and then
bail out. It is fine. The other canceling caller needs to cancel the
timer as well. The important thing is that the queue (list)
manipulation is done atomically under worker->lock.
Link: https://lkml.kernel.org/r/20210610133051.15337-3-pmladek@xxxxxxxx
Fixes: 9a6b06c8d9a220860468a ("kthread: allow to modify delayed kthread work")
Signed-off-by: Petr Mladek <pmladek@xxxxxxxx>
Reported-by: Martin Liu <liumartin@xxxxxxxxxx>
Cc: <jenhaochen@xxxxxxxxxx>
Cc: Minchan Kim <minchan@xxxxxxxxxx>
Cc: Nathan Chancellor <nathan@xxxxxxxxxx>
Cc: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
Cc: Oleg Nesterov <oleg@xxxxxxxxxx>
Cc: Tejun Heo <tj@xxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
kernel/kthread.c | 35 ++++++++++++++++++++++++-----------
1 file changed, 24 insertions(+), 11 deletions(-)
diff --git a/kernel/kthread.c b/kernel/kthread.c
index 1086f21c641b..2eb8d7550324 100644
--- a/kernel/kthread.c
+++ b/kernel/kthread.c
@@ -1047,8 +1047,11 @@ static void kthread_cancel_delayed_work_timer(struct kthread_work *work,
}
/*
- * This function removes the work from the worker queue. Also it makes sure
- * that it won't get queued later via the delayed work's timer.
+ * This function removes the work from the worker queue.
+ *
+ * It is called under worker->lock. The caller must make sure that
+ * the timer used by delayed work is not running, e.g. by calling
+ * kthread_cancel_delayed_work_timer().
*
* The work might still be in use when this function finishes. See the
* current_work proceed by the worker.
@@ -1056,13 +1059,8 @@ static void kthread_cancel_delayed_work_timer(struct kthread_work *work,
* Return: %true if @work was pending and successfully canceled,
* %false if @work was not pending
*/
-static bool __kthread_cancel_work(struct kthread_work *work, bool is_dwork,
- unsigned long *flags)
+static bool __kthread_cancel_work(struct kthread_work *work)
{
- /* Try to cancel the timer if exists. */
- if (is_dwork)
- kthread_cancel_delayed_work_timer(work, flags);
-
/*
* Try to remove the work from a worker list. It might either
* be from worker->work_list or from worker->delayed_work_list.
@@ -1115,11 +1113,23 @@ bool kthread_mod_delayed_work(struct kthread_worker *worker,
/* Work must not be used with >1 worker, see kthread_queue_work() */
WARN_ON_ONCE(work->worker != worker);
- /* Do not fight with another command that is canceling this work. */
+ /*
+ * Temporary cancel the work but do not fight with another command
+ * that is canceling the work as well.
+ *
+ * It is a bit tricky because of possible races with another
+ * mod_delayed_work() and cancel_delayed_work() callers.
+ *
+ * The timer must be canceled first because worker->lock is released
+ * when doing so. But the work can be removed from the queue (list)
+ * only when it can be queued again so that the return value can
+ * be used for reference counting.
+ */
+ kthread_cancel_delayed_work_timer(work, &flags);
if (work->canceling)
goto out;
+ ret = __kthread_cancel_work(work);
- ret = __kthread_cancel_work(work, true, &flags);
fast_queue:
__kthread_queue_delayed_work(worker, dwork, delay);
out:
@@ -1141,7 +1151,10 @@ static bool __kthread_cancel_work_sync(struct kthread_work *work, bool is_dwork)
/* Work must not be used with >1 worker, see kthread_queue_work(). */
WARN_ON_ONCE(work->worker != worker);
- ret = __kthread_cancel_work(work, is_dwork, &flags);
+ if (is_dwork)
+ kthread_cancel_delayed_work_timer(work, &flags);
+
+ ret = __kthread_cancel_work(work);
if (worker->current_work != work)
goto out_fast;
--
2.30.2
