From: Praneeth Bajjuri <praneeth@xxxxxx> [ Upstream commit da9ef50f545f86ffe6ff786174d26500c4db737a ] Current logic is performing hard reset and causing the programmed registers to be wiped out. as per datasheet: https://www.ti.com/lit/ds/symlink/dp83867cr.pdf 8.6.26 Control Register (CTRL) do SW_RESTART to perform a reset not including the registers, If performed when link is already present, it will drop the link and trigger re-auto negotiation. Signed-off-by: Praneeth Bajjuri <praneeth@xxxxxx> Signed-off-by: Geet Modi <geet.modi@xxxxxx> Reviewed-by: Andrew Lunn <andrew@xxxxxxx> Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/net/phy/dp83867.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c index 69d3eacc2b96..c716074fdef0 100644 --- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -792,16 +792,12 @@ static int dp83867_phy_reset(struct phy_device *phydev) { int err; - err = phy_write(phydev, DP83867_CTRL, DP83867_SW_RESET); + err = phy_write(phydev, DP83867_CTRL, DP83867_SW_RESTART); if (err < 0) return err; usleep_range(10, 20); - /* After reset FORCE_LINK_GOOD bit is set. Although the - * default value should be unset. Disable FORCE_LINK_GOOD - * for the phy to work properly. - */ return phy_modify(phydev, MII_DP83867_PHYCTRL, DP83867_PHYCR_FORCE_LINK_GOOD, 0); } -- 2.30.2
