This is a note to let you know that I've just added the patch titled
powerpc: Fix 64 bit builds with binutils 2.24
to the 3.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
powerpc-fix-64-bit-builds-with-binutils-2.24.patch
and it can be found in the queue-3.14 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 7998eb3dc700aaf499f93f50b3d77da834ef9e1d Mon Sep 17 00:00:00 2001
From: Guenter Roeck <linux@xxxxxxxxxxxx>
Date: Thu, 15 May 2014 09:33:42 -0700
Subject: powerpc: Fix 64 bit builds with binutils 2.24
From: Guenter Roeck <linux@xxxxxxxxxxxx>
commit 7998eb3dc700aaf499f93f50b3d77da834ef9e1d upstream.
With binutils 2.24, various 64 bit builds fail with relocation errors
such as
arch/powerpc/kernel/built-in.o: In function `exc_debug_crit_book3e':
(.text+0x165ee): relocation truncated to fit: R_PPC64_ADDR16_HI
against symbol `interrupt_base_book3e' defined in .text section
in arch/powerpc/kernel/built-in.o
arch/powerpc/kernel/built-in.o: In function `exc_debug_crit_book3e':
(.text+0x16602): relocation truncated to fit: R_PPC64_ADDR16_HI
against symbol `interrupt_end_book3e' defined in .text section
in arch/powerpc/kernel/built-in.o
The assembler maintainer says:
I changed the ABI, something that had to be done but unfortunately
happens to break the booke kernel code. When building up a 64-bit
value with lis, ori, shl, oris, ori or similar sequences, you now
should use @high and @higha in place of @h and @ha. @h and @ha
(and their associated relocs R_PPC64_ADDR16_HI and R_PPC64_ADDR16_HA)
now report overflow if the value is out of 32-bit signed range.
ie. @h and @ha assume you're building a 32-bit value. This is needed
to report out-of-range -mcmodel=medium toc pointer offsets in @toc@h
and @toc@ha expressions, and for consistency I did the same for all
other @h and @ha relocs.
Replacing @h with @high in one strategic location fixes the relocation
errors. This has to be done conditionally since the assembler either
supports @h or @high but not both.
Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
Signed-off-by: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
arch/powerpc/Makefile | 4 +++-
arch/powerpc/include/asm/ppc_asm.h | 7 ++++++-
2 files changed, 9 insertions(+), 2 deletions(-)
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -149,7 +149,9 @@ endif
CFLAGS-$(CONFIG_TUNE_CELL) += $(call cc-option,-mtune=cell)
-KBUILD_CPPFLAGS += -Iarch/$(ARCH)
+asinstr := $(call as-instr,lis 9$(comma)foo@high,-DHAVE_AS_ATHIGH=1)
+
+KBUILD_CPPFLAGS += -Iarch/$(ARCH) $(asinstr)
KBUILD_AFLAGS += -Iarch/$(ARCH)
KBUILD_CFLAGS += -msoft-float -pipe -Iarch/$(ARCH) $(CFLAGS-y)
CPP = $(CC) -E $(KBUILD_CFLAGS)
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -318,11 +318,16 @@ n:
addi reg,reg,(name - 0b)@l;
#ifdef __powerpc64__
+#ifdef HAVE_AS_ATHIGH
+#define __AS_ATHIGH high
+#else
+#define __AS_ATHIGH h
+#endif
#define LOAD_REG_IMMEDIATE(reg,expr) \
lis reg,(expr)@highest; \
ori reg,reg,(expr)@higher; \
rldicr reg,reg,32,31; \
- oris reg,reg,(expr)@h; \
+ oris reg,reg,(expr)@__AS_ATHIGH; \
ori reg,reg,(expr)@l;
#define LOAD_REG_ADDR(reg,name) \
Patches currently in stable-queue which might be from linux@xxxxxxxxxxxx are
queue-3.14/powerpc-fix-64-bit-builds-with-binutils-2.24.patch
queue-3.14/hwmon-emc1403-support-full-range-of-known-chip-revision-numbers.patch
queue-3.14/hwmon-emc1403-fix-inverted-store_hyst.patch
queue-3.14/hwmon-emc1403-fix-resource-leak-on-module-unload.patch
queue-3.14/revert-hwmon-coretemp-refine-tjmax-detection.patch
queue-3.14/acpi-revert-acpi-ac-convert-acpi-ac-driver-to-platform-bus.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html