Re: [PATCH 1/8] bus: mhi: core: Validate channel ID when processing command completions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jun 24, 2021 at 03:50:45PM +0200, Greg KH wrote:
> On Mon, Jun 21, 2021 at 09:46:09PM +0530, Manivannan Sadhasivam wrote:
> > From: Bhaumik Bhatt <bbhatt@xxxxxxxxxxxxxx>
> > 
> > MHI reads the channel ID from the event ring element sent by the
> > device which can be any value between 0 and 255. In order to
> > prevent any out of bound accesses, add a check against the maximum
> > number of channels supported by the controller and those channels
> > not configured yet so as to skip processing of that event ring
> > element.
> > 
> > Cc: stable@xxxxxxxxxxxxxxx
> > Fixes: 1d3173a3bae7 ("bus: mhi: core: Add support for processing events from client device")
> > Signed-off-by: Bhaumik Bhatt <bbhatt@xxxxxxxxxxxxxx>
> > Reviewed-by: Hemant Kumar <hemantk@xxxxxxxxxxxxxx>
> > Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> > Reviewed-by: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
> > Link: https://lore.kernel.org/r/1619481538-4435-1-git-send-email-bbhatt@xxxxxxxxxxxxxx
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> > ---
> >  drivers/bus/mhi/core/main.c | 15 ++++++++++-----
> >  1 file changed, 10 insertions(+), 5 deletions(-)
> > 
> > diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
> > index 22acde118bc3..ed07421c4870 100644
> > --- a/drivers/bus/mhi/core/main.c
> > +++ b/drivers/bus/mhi/core/main.c
> > @@ -773,11 +773,16 @@ static void mhi_process_cmd_completion(struct mhi_controller *mhi_cntrl,
> >  	cmd_pkt = mhi_to_virtual(mhi_ring, ptr);
> >  
> >  	chan = MHI_TRE_GET_CMD_CHID(cmd_pkt);
> > -	mhi_chan = &mhi_cntrl->mhi_chan[chan];
> > -	write_lock_bh(&mhi_chan->lock);
> > -	mhi_chan->ccs = MHI_TRE_GET_EV_CODE(tre);
> > -	complete(&mhi_chan->completion);
> > -	write_unlock_bh(&mhi_chan->lock);
> > +	WARN_ON(chan >= mhi_cntrl->max_chan);
> 
> What can ever trigger this WARN_ON()?  Do you mean to reboot a machine
> if panic-on-warn is set?
> 
> If this can actually happen, then check for it and recover properly,
> don't just blindly warn and then keep on going.
> 

We can't do much here other than warning the user and dropping the
command.

There is no recovery possible because, the device has sent the command
completion event on a wrong channel. It can't happen usually unless a
malcious device sits on the other end.

Thanks,
Mani

> thanks,
> 
> greg k-h



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux