From: Aleksander Jan Bajkowski <olek2@xxxxx>
[ Upstream commit f2386cf7c5f4ff5d7b584f5d92014edd7df6c676 ]
This patch fixes TX hangs with threaded NAPI enabled. The scheduled
NAPI seems to be executed in parallel with the interrupt on second
thread. Sometimes it happens that ltq_dma_disable_irq() is executed
after xrx200_tx_housekeeping(). The symptom is that TX interrupts
are disabled in the DMA controller. As a result, the TX hangs after
a few seconds of the iperf test. Scheduling NAPI after disabling
interrupts fixes this issue.
Tested on Lantiq xRX200 (BT Home Hub 5A).
Fixes: 9423361da523 ("net: lantiq: Disable IRQs only if NAPI gets scheduled ")
Signed-off-by: Aleksander Jan Bajkowski <olek2@xxxxx>
Acked-by: Hauke Mehrtens <hauke@xxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/net/ethernet/lantiq_xrx200.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/lantiq_xrx200.c b/drivers/net/ethernet/lantiq_xrx200.c
index 135ba5b6ae98..3da494df72f3 100644
--- a/drivers/net/ethernet/lantiq_xrx200.c
+++ b/drivers/net/ethernet/lantiq_xrx200.c
@@ -352,8 +352,8 @@ static irqreturn_t xrx200_dma_irq(int irq, void *ptr)
struct xrx200_chan *ch = ptr;
if (napi_schedule_prep(&ch->napi)) {
- __napi_schedule(&ch->napi);
ltq_dma_disable_irq(&ch->dma);
+ __napi_schedule(&ch->napi);
}
ltq_dma_ack_irq(&ch->dma);
--
2.30.2
