From: Axel Lin <axel.lin@xxxxxxxxxx>
commit 1963fa67d78674a110bc9b2a8b1e226967692f05 upstream.
The .n_voltages was missed for pickable linear ranges, fix it.
The min_sel for each pickable range should be starting from 0.
Also fix atc260x_ldo_voltage_range_sel setting (bit 5 - LDO<N>_VOL_SEL
in datasheet).
Fixes: 3b15ccac161a ("regulator: Add regulator driver for ATC260x PMICs")
Signed-off-by: Axel Lin <axel.lin@xxxxxxxxxx>
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxx>
Link: https://lore.kernel.org/r/20210528230147.363974-1-axel.lin@xxxxxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/regulator/atc260x-regulator.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
--- a/drivers/regulator/atc260x-regulator.c
+++ b/drivers/regulator/atc260x-regulator.c
@@ -28,16 +28,16 @@ static const struct linear_range atc2609
static const struct linear_range atc2609a_ldo_voltage_ranges0[] = {
REGULATOR_LINEAR_RANGE(700000, 0, 15, 100000),
- REGULATOR_LINEAR_RANGE(2100000, 16, 28, 100000),
+ REGULATOR_LINEAR_RANGE(2100000, 0, 12, 100000),
};
static const struct linear_range atc2609a_ldo_voltage_ranges1[] = {
REGULATOR_LINEAR_RANGE(850000, 0, 15, 100000),
- REGULATOR_LINEAR_RANGE(2100000, 16, 27, 100000),
+ REGULATOR_LINEAR_RANGE(2100000, 0, 11, 100000),
};
static const unsigned int atc260x_ldo_voltage_range_sel[] = {
- 0x0, 0x1,
+ 0x0, 0x20,
};
static int atc260x_dcdc_set_voltage_time_sel(struct regulator_dev *rdev,
@@ -411,7 +411,7 @@ enum atc2609a_reg_ids {
.owner = THIS_MODULE, \
}
-#define atc2609a_reg_desc_ldo_range_pick(num, n_range) { \
+#define atc2609a_reg_desc_ldo_range_pick(num, n_range, n_volt) { \
.name = "LDO"#num, \
.supply_name = "ldo"#num, \
.of_match = of_match_ptr("ldo"#num), \
@@ -421,6 +421,7 @@ enum atc2609a_reg_ids {
.type = REGULATOR_VOLTAGE, \
.linear_ranges = atc2609a_ldo_voltage_ranges##n_range, \
.n_linear_ranges = ARRAY_SIZE(atc2609a_ldo_voltage_ranges##n_range), \
+ .n_voltages = n_volt, \
.vsel_reg = ATC2609A_PMU_LDO##num##_CTL0, \
.vsel_mask = GENMASK(4, 1), \
.vsel_range_reg = ATC2609A_PMU_LDO##num##_CTL0, \
@@ -458,12 +459,12 @@ static const struct regulator_desc atc26
atc2609a_reg_desc_ldo_bypass(0),
atc2609a_reg_desc_ldo_bypass(1),
atc2609a_reg_desc_ldo_bypass(2),
- atc2609a_reg_desc_ldo_range_pick(3, 0),
- atc2609a_reg_desc_ldo_range_pick(4, 0),
+ atc2609a_reg_desc_ldo_range_pick(3, 0, 29),
+ atc2609a_reg_desc_ldo_range_pick(4, 0, 29),
atc2609a_reg_desc_ldo(5),
- atc2609a_reg_desc_ldo_range_pick(6, 1),
- atc2609a_reg_desc_ldo_range_pick(7, 0),
- atc2609a_reg_desc_ldo_range_pick(8, 0),
+ atc2609a_reg_desc_ldo_range_pick(6, 1, 28),
+ atc2609a_reg_desc_ldo_range_pick(7, 0, 29),
+ atc2609a_reg_desc_ldo_range_pick(8, 0, 29),
atc2609a_reg_desc_ldo_fixed(9),
};
