The Ux500 HREF LEDs have not been probing properly for a
while as this was introduce:
ret = of_property_read_u32(np, "color", &led_color);
if (ret)
return ret;
Since the device tree did not define the new invented color
attribute, probe was failing.
Define color attributes for the LEDs so they work again.
Fixes: 92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx")
Cc: stable@xxxxxxxxxxxxxxx
Cc: Dan Murphy <dmurphy@xxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
SoC maintainers: please apply this directly for fixes.
---
arch/arm/boot/dts/ste-href.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 00e7d76e8656..48408fd391d6 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
#include "ste-href-family-pinctrl.dtsi"
/ {
@@ -69,17 +70,20 @@ chan@0 {
reg = <0>;
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
+ color = <LED_COLOR_ID_BLUE>;
linux,default-trigger = "heartbeat";
};
chan@1 {
reg = <1>;
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
+ color = <LED_COLOR_ID_BLUE>;
};
chan@2 {
reg = <2>;
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
+ color = <LED_COLOR_ID_BLUE>;
};
};
lp5521@34 {
@@ -93,16 +97,19 @@ chan@0 {
reg = <0>;
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
+ color = <LED_COLOR_ID_BLUE>;
};
chan@1 {
reg = <1>;
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
+ color = <LED_COLOR_ID_BLUE>;
};
chan@2 {
reg = <2>;
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
+ color = <LED_COLOR_ID_BLUE>;
};
};
bh1780@29 {
--
2.31.1
