From: Johnny Chuang <johnny.chuang.emc@xxxxxxxxx> commit ca66a6770bd9d6d99e469debd1c7363ac455daf9 upstream. For ELAN touchscreen, we found our boot code of IC was not flexible enough to receive and handle this command. Once the FW main code of our controller is crashed for some reason, the controller could not be enumerated successfully to be recognized by the system host. therefore, it lost touch functionality. Add quirk for skip send power-on command after reset. It will impact to ELAN touchscreen and touchpad on HID over I2C projects. Fixes: 43b7029f475e ("HID: i2c-hid: Send power-on command after reset"). Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Johnny Chuang <johnny.chuang.emc@xxxxxxxxx> Reviewed-by: Harry Cutts <hcutts@xxxxxxxxxxxx> Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx> Tested-by: Douglas Anderson <dianders@xxxxxxxxxxxx> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/hid/i2c-hid/i2c-hid-core.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) --- a/drivers/hid/i2c-hid/i2c-hid-core.c +++ b/drivers/hid/i2c-hid/i2c-hid-core.c @@ -50,6 +50,7 @@ #define I2C_HID_QUIRK_BOGUS_IRQ BIT(4) #define I2C_HID_QUIRK_RESET_ON_RESUME BIT(5) #define I2C_HID_QUIRK_BAD_INPUT_SIZE BIT(6) +#define I2C_HID_QUIRK_NO_WAKEUP_AFTER_RESET BIT(7) /* flags */ @@ -185,6 +186,11 @@ static const struct i2c_hid_quirks { I2C_HID_QUIRK_RESET_ON_RESUME }, { USB_VENDOR_ID_ITE, I2C_DEVICE_ID_ITE_LENOVO_LEGION_Y720, I2C_HID_QUIRK_BAD_INPUT_SIZE }, + /* + * Sending the wakeup after reset actually break ELAN touchscreen controller + */ + { USB_VENDOR_ID_ELAN, HID_ANY_ID, + I2C_HID_QUIRK_NO_WAKEUP_AFTER_RESET }, { 0, 0 } }; @@ -468,7 +474,8 @@ static int i2c_hid_hwreset(struct i2c_cl } /* At least some SIS devices need this after reset */ - ret = i2c_hid_set_power(client, I2C_HID_PWR_ON); + if (!(ihid->quirks & I2C_HID_QUIRK_NO_WAKEUP_AFTER_RESET)) + ret = i2c_hid_set_power(client, I2C_HID_PWR_ON); out_unlock: mutex_unlock(&ihid->reset_lock);