From: Johannes Berg <johannes.berg@xxxxxxxxx>
Upstream commit b4b177a5556a686909e643f1e9b6434c10de079f.
Jouni reported that if a remain-on-channel was active on the
same channel as the current operating channel, then the ROC
would start, but any frames transmitted using mgmt-tx on the
same channel would get delayed until after the ROC.
The reason for this is that the ROC starts, but doesn't have
any handling for "remain on the same channel", so it stops
the interface queues. The later mgmt-tx then puts the frame
on the interface queues (since it's on the current operating
channel) and thus they get delayed until after the ROC.
To fix this, add some logic to handle remaining on the same
channel specially and not stop the queues etc. in this case.
This not only fixes the bug but also improves behaviour in
this case as data frames etc. can continue to flow.
Cc: stable@xxxxxxxxxxxxxxx
Reported-by: Jouni Malinen <j@xxxxx>
Tested-by: Jouni Malinen <j@xxxxx>
Signed-off-by: Johannes Berg <johannes.berg@xxxxxxxxx>
---
net/mac80211/ieee80211_i.h | 1 +
net/mac80211/offchannel.c | 25 ++++++++++++++++++-------
2 files changed, 19 insertions(+), 7 deletions(-)
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 92ef04c72c51..e050acf63c70 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -311,6 +311,7 @@ struct ieee80211_roc_work {
bool started, abort, hw_begun, notified;
bool to_be_freed;
+ bool on_channel;
unsigned long hw_start_time;
diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c
index 11d3f227e11e..0427a58b4397 100644
--- a/net/mac80211/offchannel.c
+++ b/net/mac80211/offchannel.c
@@ -333,7 +333,7 @@ void ieee80211_sw_roc_work(struct work_struct *work)
container_of(work, struct ieee80211_roc_work, work.work);
struct ieee80211_sub_if_data *sdata = roc->sdata;
struct ieee80211_local *local = sdata->local;
- bool started;
+ bool started, on_channel;
mutex_lock(&local->mtx);
@@ -354,14 +354,24 @@ void ieee80211_sw_roc_work(struct work_struct *work)
if (!roc->started) {
struct ieee80211_roc_work *dep;
- /* start this ROC */
- ieee80211_offchannel_stop_vifs(local);
+ WARN_ON(local->use_chanctx);
+
+ /* If actually operating on the desired channel (with at least
+ * 20 MHz channel width) don't stop all the operations but still
+ * treat it as though the ROC operation started properly, so
+ * other ROC operations won't interfere with this one.
+ */
+ roc->on_channel = roc->chan == local->_oper_chandef.chan;
- /* switch channel etc */
+ /* start this ROC */
ieee80211_recalc_idle(local);
- local->tmp_channel = roc->chan;
- ieee80211_hw_config(local, 0);
+ if (!roc->on_channel) {
+ ieee80211_offchannel_stop_vifs(local);
+
+ local->tmp_channel = roc->chan;
+ ieee80211_hw_config(local, 0);
+ }
/* tell userspace or send frame */
ieee80211_handle_roc_started(roc);
@@ -380,9 +390,10 @@ void ieee80211_sw_roc_work(struct work_struct *work)
finish:
list_del(&roc->list);
started = roc->started;
+ on_channel = roc->on_channel;
ieee80211_roc_notify_destroy(roc, !roc->abort);
- if (started) {
+ if (started && !on_channel) {
ieee80211_flush_queues(local, NULL);
local->tmp_channel = NULL;
--
2.0.0.rc0
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html