From: Qii Wang <qii.wang@xxxxxxxxxxxx>
commit 63ce8e3df8f6deca2da52eaf064751ad4018b46e upstream.
There are some omissions in the previous patch about replacing
I2C_MAX_FAST_MODE__FREQ with I2C_MAX_FAST_MODE_PLUS_FREQ and
need to fix it.
Fixes: b44658e755b5("i2c: mediatek: Send i2c master code at more than 1MHz")
Signed-off-by: Qii Wang <qii.wang@xxxxxxxxxxxx>
Signed-off-by: Wolfram Sang <wsa@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-mt65xx.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -564,7 +564,7 @@ static const struct i2c_spec_values *mtk
static int mtk_i2c_max_step_cnt(unsigned int target_speed)
{
- if (target_speed > I2C_MAX_FAST_MODE_FREQ)
+ if (target_speed > I2C_MAX_FAST_MODE_PLUS_FREQ)
return MAX_HS_STEP_CNT_DIV;
else
return MAX_STEP_CNT_DIV;
@@ -635,7 +635,7 @@ static int mtk_i2c_check_ac_timing(struc
if (sda_min > sda_max)
return -3;
- if (check_speed > I2C_MAX_FAST_MODE_FREQ) {
+ if (check_speed > I2C_MAX_FAST_MODE_PLUS_FREQ) {
if (i2c->dev_comp->ltiming_adjust) {
i2c->ac_timing.hs = I2C_TIME_DEFAULT_VALUE |
(sample_cnt << 12) | (high_cnt << 8);
@@ -850,7 +850,7 @@ static int mtk_i2c_do_transfer(struct mt
control_reg = mtk_i2c_readw(i2c, OFFSET_CONTROL) &
~(I2C_CONTROL_DIR_CHANGE | I2C_CONTROL_RS);
- if ((i2c->speed_hz > I2C_MAX_FAST_MODE_FREQ) || (left_num >= 1))
+ if ((i2c->speed_hz > I2C_MAX_FAST_MODE_PLUS_FREQ) || (left_num >= 1))
control_reg |= I2C_CONTROL_RS;
if (i2c->op == I2C_MASTER_WRRD)
@@ -1067,7 +1067,8 @@ static int mtk_i2c_transfer(struct i2c_a
}
}
- if (i2c->auto_restart && num >= 2 && i2c->speed_hz > I2C_MAX_FAST_MODE_FREQ)
+ if (i2c->auto_restart && num >= 2 &&
+ i2c->speed_hz > I2C_MAX_FAST_MODE_PLUS_FREQ)
/* ignore the first restart irq after the master code,
* otherwise the first transfer will be discarded.
*/
