From: Vladimir Isaev <isaev@xxxxxxxxxxxx>
commit 1d5e4640e5df15252398c1b621f6bd432f2d7f17 upstream.
Commit 4af22ded0ecf ("arc: fix memory initialization for systems
with two memory banks") fixed highmem, but for the PAE case it causes
bug messages:
| BUG: Bad page state in process swapper pfn:80000
| page:(ptrval) refcount:0 mapcount:1 mapping:00000000 index:0x0 pfn:0x80000 flags: 0x0()
| raw: 00000000 00000100 00000122 00000000 00000000 00000000 00000000 00000000
| raw: 00000000
| page dumped because: nonzero mapcount
| Modules linked in:
| CPU: 0 PID: 0 Comm: swapper Not tainted 5.12.0-rc5-00003-g1e43c377a79f #1
This is because the fix expects highmem to be always less than
lowmem and uses min_low_pfn as an upper zone border for highmem.
max_high_pfn should be ok for both highmem and highmem+PAE cases.
Fixes: 4af22ded0ecf ("arc: fix memory initialization for systems with two memory banks")
Signed-off-by: Vladimir Isaev <isaev@xxxxxxxxxxxx>
Cc: Mike Rapoport <rppt@xxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx #5.8 onwards
Signed-off-by: Vineet Gupta <vgupta@xxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
arch/arc/mm/init.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
--- a/arch/arc/mm/init.c
+++ b/arch/arc/mm/init.c
@@ -158,7 +158,16 @@ void __init setup_arch_memory(void)
min_high_pfn = PFN_DOWN(high_mem_start);
max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
- max_zone_pfn[ZONE_HIGHMEM] = min_low_pfn;
+ /*
+ * max_high_pfn should be ok here for both HIGHMEM and HIGHMEM+PAE.
+ * For HIGHMEM without PAE max_high_pfn should be less than
+ * min_low_pfn to guarantee that these two regions don't overlap.
+ * For PAE case highmem is greater than lowmem, so it is natural
+ * to use max_high_pfn.
+ *
+ * In both cases, holes should be handled by pfn_valid().
+ */
+ max_zone_pfn[ZONE_HIGHMEM] = max_high_pfn;
high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
kmap_init();
