Re: 5.10.37 won't boot on my system, but 5.10.36 with same config does

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Christoph Biedl <linux-kernel.bfrz@xxxxxxxxxxxxxxxxxx> 于2021年5月17日周一 下午2:25写道:
>
> Jack Wang wrote...
>
> > Christoph Biedl <linux-kernel.bfrz@xxxxxxxxxxxxxxxxxx> 于2021年5月17日周一 下午1:52写道:
> > >
> > > Christoph Biedl wrote...
> > >
> > > > Thanks for taking care, unfortunately no improvement with 5.10.38-rc1 here.
> > >
> > > So in case this is related to the .config, I'm attaching it. Hardware is,
> > > as said before, an old Thinkpad x200, vendor BIOS and no particular modifications.
> > > After disabling all vga/video/fbcon parameters I see the system suffers
> > > a kernel panic but unfortunately only the last 25 lines are visible.
> > > Possibly (typos are mine)
> > >
> > >     RIP: 0010:__domain_mapping+0xa7/0x3a0
> > >
> > > is a hint into the right direction?
> > This looks intel_iommu related, can you try boot with
> > "intel_iommu=off" in kernel parameter?
>
> Gotcha. System boots up fine then.
>
>     Christoph
So it's caused by this commit[1], and it should be fixed by latest
5.10.38-rc1 https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/log/?h=linux-5.10.y
[1]https://lore.kernel.org/stable/20210515132855.4bn7ve2ozvdhpnj4@xxxxxxxxxxxxxxxxx/




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux