From: Po-Hao Huang <phhuang@xxxxxxxxxxx>
[ Upstream commit 7bd3760c71f7a18485d2c10ea0887e1d41519f4e ]
We used to stop napi before disabling irqs. And it turns out
to cause some problem when we try to stop device while interrupt arrives.
To safely stop pci, we do three steps:
1. disable interrupt
2. synchronize_irq
3. stop_napi
Since step 2 and 3 may not finish as expected when interrupt is enabled,
use rtwpci->running to decide whether interrupt should be re-enabled at
the time.
Fixes: 9e2fd29864c5 ("rtw88: add napi support")
Signed-off-by: Po-Hao Huang <phhuang@xxxxxxxxxxx>
Signed-off-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20210415084703.27255-4-pkshih@xxxxxxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/net/wireless/realtek/rtw88/pci.c | 19 ++++++++++++++-----
drivers/net/wireless/realtek/rtw88/pci.h | 1 +
2 files changed, 15 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw88/pci.c b/drivers/net/wireless/realtek/rtw88/pci.c
index 786a48649946..6b5c885798a4 100644
--- a/drivers/net/wireless/realtek/rtw88/pci.c
+++ b/drivers/net/wireless/realtek/rtw88/pci.c
@@ -581,23 +581,30 @@ static int rtw_pci_start(struct rtw_dev *rtwdev)
{
struct rtw_pci *rtwpci = (struct rtw_pci *)rtwdev->priv;
+ rtw_pci_napi_start(rtwdev);
+
spin_lock_bh(&rtwpci->irq_lock);
+ rtwpci->running = true;
rtw_pci_enable_interrupt(rtwdev, rtwpci, false);
spin_unlock_bh(&rtwpci->irq_lock);
- rtw_pci_napi_start(rtwdev);
-
return 0;
}
static void rtw_pci_stop(struct rtw_dev *rtwdev)
{
struct rtw_pci *rtwpci = (struct rtw_pci *)rtwdev->priv;
+ struct pci_dev *pdev = rtwpci->pdev;
+ spin_lock_bh(&rtwpci->irq_lock);
+ rtwpci->running = false;
+ rtw_pci_disable_interrupt(rtwdev, rtwpci);
+ spin_unlock_bh(&rtwpci->irq_lock);
+
+ synchronize_irq(pdev->irq);
rtw_pci_napi_stop(rtwdev);
spin_lock_bh(&rtwpci->irq_lock);
- rtw_pci_disable_interrupt(rtwdev, rtwpci);
rtw_pci_dma_release(rtwdev, rtwpci);
spin_unlock_bh(&rtwpci->irq_lock);
}
@@ -1138,7 +1145,8 @@ static irqreturn_t rtw_pci_interrupt_threadfn(int irq, void *dev)
rtw_fw_c2h_cmd_isr(rtwdev);
/* all of the jobs for this interrupt have been done */
- rtw_pci_enable_interrupt(rtwdev, rtwpci, rx);
+ if (rtwpci->running)
+ rtw_pci_enable_interrupt(rtwdev, rtwpci, rx);
spin_unlock_bh(&rtwpci->irq_lock);
return IRQ_HANDLED;
@@ -1558,7 +1566,8 @@ static int rtw_pci_napi_poll(struct napi_struct *napi, int budget)
if (work_done < budget) {
napi_complete_done(napi, work_done);
spin_lock_bh(&rtwpci->irq_lock);
- rtw_pci_enable_interrupt(rtwdev, rtwpci, false);
+ if (rtwpci->running)
+ rtw_pci_enable_interrupt(rtwdev, rtwpci, false);
spin_unlock_bh(&rtwpci->irq_lock);
/* When ISR happens during polling and before napi_complete
* while no further data is received. Data on the dma_ring will
diff --git a/drivers/net/wireless/realtek/rtw88/pci.h b/drivers/net/wireless/realtek/rtw88/pci.h
index e76fc549a788..0ffae887527a 100644
--- a/drivers/net/wireless/realtek/rtw88/pci.h
+++ b/drivers/net/wireless/realtek/rtw88/pci.h
@@ -211,6 +211,7 @@ struct rtw_pci {
spinlock_t irq_lock;
u32 irq_mask[4];
bool irq_enabled;
+ bool running;
/* napi structure */
struct net_device netdev;
--
2.30.2
