[PATCH 5.12 555/677] pinctrl: at91-pio4: Fix slew rate disablement

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>

[ Upstream commit cbde6c823bfaa553fb162257a5926ba15ebaaa43 ]

The slew rate was enabled by default for each configuration of the
pin. In case the pin had more than one configuration, even if
we set the slew rate as disabled in the device tree, the next pin
configuration would set again the slew rate enabled by default,
overwriting the slew rate disablement.
Instead of enabling the slew rate by default for each pin configuration,
enable the slew rate by default just once per pin, regardless of the
number of configurations. This way the slew rate disablement will also
work for cases where pins have multiple configurations.

Fixes: c709135e576b ("pinctrl: at91-pio4: add support for slew-rate")
Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
Reviewed-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
Acked-by: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20210409082522.625168-1-tudor.ambarus@xxxxxxxxxxxxx
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/pinctrl/pinctrl-at91-pio4.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-at91-pio4.c b/drivers/pinctrl/pinctrl-at91-pio4.c
index e71ebccc479c..03c32b2c5d30 100644
--- a/drivers/pinctrl/pinctrl-at91-pio4.c
+++ b/drivers/pinctrl/pinctrl-at91-pio4.c
@@ -801,6 +801,10 @@ static int atmel_conf_pin_config_group_set(struct pinctrl_dev *pctldev,
 
 	conf = atmel_pin_config_read(pctldev, pin_id);
 
+	/* Keep slew rate enabled by default. */
+	if (atmel_pioctrl->slew_rate_support)
+		conf |= ATMEL_PIO_SR_MASK;
+
 	for (i = 0; i < num_configs; i++) {
 		unsigned int param = pinconf_to_config_param(configs[i]);
 		unsigned int arg = pinconf_to_config_argument(configs[i]);
@@ -808,10 +812,6 @@ static int atmel_conf_pin_config_group_set(struct pinctrl_dev *pctldev,
 		dev_dbg(pctldev->dev, "%s: pin=%u, config=0x%lx\n",
 			__func__, pin_id, configs[i]);
 
-		/* Keep slew rate enabled by default. */
-		if (atmel_pioctrl->slew_rate_support)
-			conf |= ATMEL_PIO_SR_MASK;
-
 		switch (param) {
 		case PIN_CONFIG_BIAS_DISABLE:
 			conf &= (~ATMEL_PIO_PUEN_MASK);
-- 
2.30.2






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux