From: Igor Pylypiv <ipylypiv@xxxxxxxxxx> [ Upstream commit 3f744a14f331f56703a9d74e86520db045f11831 ] The mpi_uninit_check() takes longer for inbound doorbell register to be cleared. Increase the timeout substantially so that the driver does not fail to load. Previously, the inbound doorbell wait time was mistakenly increased in the mpi_init_check() instead of mpi_uninit_check(). It is okay to leave the mpi_init_check() wait time as-is as these are timeout values and if there is a failure, waiting longer is not an issue. Link: https://lore.kernel.org/r/20210406180534.1924345-2-ipylypiv@xxxxxxxxxx Fixes: e90e236250e9 ("scsi: pm80xx: Increase timeout for pm80xx mpi_uninit_check") Reviewed-by: Vishakha Channapattan <vishakhavc@xxxxxxxxxx> Acked-by: Jack Wang <jinpu.wang@xxxxxxxxx> Signed-off-by: Igor Pylypiv <ipylypiv@xxxxxxxxxx> Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/scsi/pm8001/pm80xx_hwi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c index 84315560e8e1..c6b0834e3806 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.c +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -1502,9 +1502,9 @@ static int mpi_uninit_check(struct pm8001_hba_info *pm8001_ha) /* wait until Inbound DoorBell Clear Register toggled */ if (IS_SPCV_12G(pm8001_ha->pdev)) { - max_wait_count = 4 * 1000 * 1000;/* 4 sec */ + max_wait_count = 30 * 1000 * 1000; /* 30 sec */ } else { - max_wait_count = 2 * 1000 * 1000;/* 2 sec */ + max_wait_count = 15 * 1000 * 1000; /* 15 sec */ } do { udelay(1); -- 2.30.2
