[PATCH 5.11 224/601] usb: gadget: aspeed: fix dma map failure

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Tao Ren <rentao.bupt@xxxxxxxxx>

[ Upstream commit bd4d607044b961cecbf8c4c2f3bb5da4fb156993 ]

Currently the virtual port_dev device is passed to DMA API, and this is
wrong because the device passed to DMA API calls must be the actual
hardware device performing the DMA.

The patch replaces usb_gadget_map_request/usb_gadget_unmap_request APIs
with usb_gadget_map_request_by_dev/usb_gadget_unmap_request_by_dev APIs
so the DMA capable platform device can be passed to the DMA APIs.

The patch fixes below backtrace detected on Facebook AST2500 OpenBMC
platforms:

[<80106550>] show_stack+0x20/0x24
[<80106868>] dump_stack+0x28/0x30
[<80823540>] __warn+0xfc/0x110
[<8011ac30>] warn_slowpath_fmt+0xb0/0xc0
[<8011ad44>] dma_map_page_attrs+0x24c/0x314
[<8016a27c>] usb_gadget_map_request_by_dev+0x100/0x1e4
[<805cedd8>] usb_gadget_map_request+0x1c/0x20
[<805cefbc>] ast_vhub_epn_queue+0xa0/0x1d8
[<7f02f710>] usb_ep_queue+0x48/0xc4
[<805cd3e8>] ecm_do_notify+0xf8/0x248
[<7f145920>] ecm_set_alt+0xc8/0x1d0
[<7f145c34>] composite_setup+0x680/0x1d30
[<7f00deb8>] ast_vhub_ep0_handle_setup+0xa4/0x1bc
[<7f02ee94>] ast_vhub_dev_irq+0x58/0x84
[<7f0309e0>] ast_vhub_irq+0xb0/0x1c8
[<7f02e118>] __handle_irq_event_percpu+0x50/0x19c
[<8015e5bc>] handle_irq_event_percpu+0x38/0x8c
[<8015e758>] handle_irq_event+0x38/0x4c

Fixes: 7ecca2a4080c ("usb/gadget: Add driver for Aspeed SoC virtual hub")
Reviewed-by: Joel Stanley <joel@xxxxxxxxx>
Signed-off-by: Tao Ren <rentao.bupt@xxxxxxxxx>
Link: https://lore.kernel.org/r/20210331045831.28700-1-rentao.bupt@xxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/usb/gadget/udc/aspeed-vhub/core.c | 3 ++-
 drivers/usb/gadget/udc/aspeed-vhub/epn.c  | 2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/udc/aspeed-vhub/core.c b/drivers/usb/gadget/udc/aspeed-vhub/core.c
index be7bb64e3594..d11d3d14313f 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/core.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/core.c
@@ -36,6 +36,7 @@ void ast_vhub_done(struct ast_vhub_ep *ep, struct ast_vhub_req *req,
 		   int status)
 {
 	bool internal = req->internal;
+	struct ast_vhub *vhub = ep->vhub;
 
 	EPVDBG(ep, "completing request @%p, status %d\n", req, status);
 
@@ -46,7 +47,7 @@ void ast_vhub_done(struct ast_vhub_ep *ep, struct ast_vhub_req *req,
 
 	if (req->req.dma) {
 		if (!WARN_ON(!ep->dev))
-			usb_gadget_unmap_request(&ep->dev->gadget,
+			usb_gadget_unmap_request_by_dev(&vhub->pdev->dev,
 						 &req->req, ep->epn.is_in);
 		req->req.dma = 0;
 	}
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/epn.c b/drivers/usb/gadget/udc/aspeed-vhub/epn.c
index 02d8bfae58fb..cb164c615e6f 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/epn.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/epn.c
@@ -376,7 +376,7 @@ static int ast_vhub_epn_queue(struct usb_ep* u_ep, struct usb_request *u_req,
 	if (ep->epn.desc_mode ||
 	    ((((unsigned long)u_req->buf & 7) == 0) &&
 	     (ep->epn.is_in || !(u_req->length & (u_ep->maxpacket - 1))))) {
-		rc = usb_gadget_map_request(&ep->dev->gadget, u_req,
+		rc = usb_gadget_map_request_by_dev(&vhub->pdev->dev, u_req,
 					    ep->epn.is_in);
 		if (rc) {
 			dev_warn(&vhub->pdev->dev,
-- 
2.30.2






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux