[PATCH 5.11 196/601] usb: gadget: pch_udc: Provide a GPIO line used on Intel Minnowboard (v1)

[Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>]

From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>

[ Upstream commit 049d3db625a652e23488db88b6104de4d5b62f16 ]

Intel Minnowboard (v1) uses SCH GPIO line SUS7 (i.e. 12)
for VBUS sense. Provide a DMI based quirk to have it's being used.

Fixes: e20849a8c883 ("usb: gadget: pch_udc: Convert to use GPIO descriptors")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20210323153626.54908-7-andriy.shevchenko@xxxxxxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/usb/gadget/udc/pch_udc.c | 71 +++++++++++++++++++++++++-------
 1 file changed, 57 insertions(+), 14 deletions(-)

diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c
index a39122f01cdb..fd3656d0f760 100644
--- a/drivers/usb/gadget/udc/pch_udc.c
+++ b/drivers/usb/gadget/udc/pch_udc.c
@@ -7,12 +7,14 @@
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
+#include <linux/dmi.h>
 #include <linux/errno.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/machine.h>
 #include <linux/list.h>
 #include <linux/interrupt.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
-#include <linux/gpio/consumer.h>
 #include <linux/irq.h>
 
 #define PCH_VBUS_PERIOD		3000	/* VBUS polling period (msec) */
@@ -1359,6 +1361,43 @@ static irqreturn_t pch_vbus_gpio_irq(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+static struct gpiod_lookup_table minnowboard_udc_gpios = {
+	.dev_id		= "0000:02:02.4",
+	.table		= {
+		GPIO_LOOKUP("sch_gpio.33158", 12, NULL, GPIO_ACTIVE_HIGH),
+		{}
+	},
+};
+
+static const struct dmi_system_id pch_udc_gpio_dmi_table[] = {
+	{
+		.ident = "MinnowBoard",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "MinnowBoard"),
+		},
+		.driver_data = &minnowboard_udc_gpios,
+	},
+	{ }
+};
+
+static void pch_vbus_gpio_remove_table(void *table)
+{
+	gpiod_remove_lookup_table(table);
+}
+
+static int pch_vbus_gpio_add_table(struct pch_udc_dev *dev)
+{
+	struct device *d = &dev->pdev->dev;
+	const struct dmi_system_id *dmi;
+
+	dmi = dmi_first_match(pch_udc_gpio_dmi_table);
+	if (!dmi)
+		return 0;
+
+	gpiod_add_lookup_table(dmi->driver_data);
+	return devm_add_action_or_reset(d, pch_vbus_gpio_remove_table, dmi->driver_data);
+}
+
 /**
  * pch_vbus_gpio_init() - This API initializes GPIO port detecting VBUS.
  * @dev:		Reference to the driver structure
@@ -1377,8 +1416,12 @@ static int pch_vbus_gpio_init(struct pch_udc_dev *dev)
 	dev->vbus_gpio.port = NULL;
 	dev->vbus_gpio.intr = 0;
 
+	err = pch_vbus_gpio_add_table(dev);
+	if (err)
+		return err;
+
 	/* Retrieve the GPIO line from the USB gadget device */
-	gpiod = devm_gpiod_get(d, NULL, GPIOD_IN);
+	gpiod = devm_gpiod_get_optional(d, NULL, GPIOD_IN);
 	if (IS_ERR(gpiod))
 		return PTR_ERR(gpiod);
 	gpiod_set_consumer_name(gpiod, "pch_vbus");
@@ -2888,14 +2931,20 @@ static void pch_udc_pcd_reinit(struct pch_udc_dev *dev)
  * @dev:	Reference to the driver structure
  *
  * Return codes:
- *	0: Success
+ *	0:		Success
+ *	-%ERRNO:	All kind of errors when retrieving VBUS GPIO
  */
 static int pch_udc_pcd_init(struct pch_udc_dev *dev)
 {
+	int ret;
+
 	pch_udc_init(dev);
 	pch_udc_pcd_reinit(dev);
-	pch_vbus_gpio_init(dev);
-	return 0;
+
+	ret = pch_vbus_gpio_init(dev);
+	if (ret)
+		pch_udc_exit(dev);
+	return ret;
 }
 
 /**
@@ -3097,16 +3146,10 @@ static int pch_udc_probe(struct pci_dev *pdev,
 
 	dev->base_addr = pcim_iomap_table(pdev)[bar];
 
-	/*
-	 * FIXME: add a GPIO descriptor table to pdev.dev using
-	 * gpiod_add_descriptor_table() from <linux/gpio/machine.h> based on
-	 * the PCI subsystem ID. The system-dependent GPIO is necessary for
-	 * VBUS operation.
-	 */
-
 	/* initialize the hardware */
-	if (pch_udc_pcd_init(dev))
-		return -ENODEV;
+	retval = pch_udc_pcd_init(dev);
+	if (retval)
+		return retval;
 
 	pci_enable_msi(pdev);
 
-- 
2.30.2