[PATCH 5.10 419/530] KVM: PPC: Book3S HV P9: Restore host CTRL SPR after guest exit

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Nicholas Piggin <npiggin@xxxxxxxxx>

[ Upstream commit 5088eb4092df12d701af8e0e92860b7186365279 ]

The host CTRL (runlatch) value is not restored after guest exit. The
host CTRL should always be 1 except in CPU idle code, so this can result
in the host running with runlatch clear, and potentially switching to
a different vCPU which then runs with runlatch clear as well.

This has little effect on P9 machines, CTRL is only responsible for some
PMU counter logic in the host and so other than corner cases of software
relying on that, or explicitly reading the runlatch value (Linux does
not appear to be affected but it's possible non-Linux guests could be),
there should be no execution correctness problem, though it could be
used as a covert channel between guests.

There may be microcontrollers, firmware or monitoring tools that sample
the runlatch value out-of-band, however since the register is writable
by guests, these values would (should) not be relied upon for correct
operation of the host, so suboptimal performance or incorrect reporting
should be the worst problem.

Fixes: 95a6432ce9038 ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests")
Signed-off-by: Nicholas Piggin <npiggin@xxxxxxxxx>
Signed-off-by: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20210412014845.1517916-2-npiggin@xxxxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 arch/powerpc/kvm/book3s_hv.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index e3b1839fc251..280f7992ae99 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -3697,7 +3697,10 @@ static int kvmhv_p9_guest_entry(struct kvm_vcpu *vcpu, u64 time_limit,
 	vcpu->arch.dec_expires = dec + tb;
 	vcpu->cpu = -1;
 	vcpu->arch.thread_cpu = -1;
+	/* Save guest CTRL register, set runlatch to 1 */
 	vcpu->arch.ctrl = mfspr(SPRN_CTRLF);
+	if (!(vcpu->arch.ctrl & 1))
+		mtspr(SPRN_CTRLT, vcpu->arch.ctrl | 1);
 
 	vcpu->arch.iamr = mfspr(SPRN_IAMR);
 	vcpu->arch.pspb = mfspr(SPRN_PSPB);
-- 
2.30.2






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux