[PATCH 5.10 392/530] iommu/vt-d: Preset Access/Dirty bits for IOVA over FL

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Lu Baolu <baolu.lu@xxxxxxxxxxxxxxx>

[ Upstream commit a8ce9ebbecdfda3322bbcece6b3b25888217f8e3 ]

The Access/Dirty bits in the first level page table entry will be set
whenever a page table entry was used for address translation or write
permission was successfully translated. This is always true when using
the first-level page table for kernel IOVA. Instead of wasting hardware
cycles to update the certain bits, it's better to set them up at the
beginning.

Suggested-by: Ashok Raj <ashok.raj@xxxxxxxxx>
Signed-off-by: Lu Baolu <baolu.lu@xxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20210115004202.953965-1-baolu.lu@xxxxxxxxxxxxxxx
Signed-off-by: Joerg Roedel <jroedel@xxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/iommu/intel/iommu.c | 17 ++++++++++++-----
 include/linux/intel-iommu.h |  2 ++
 2 files changed, 14 insertions(+), 5 deletions(-)

diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index 3295e5e162a4..8010c3895f8c 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -1028,8 +1028,11 @@ static struct dma_pte *pfn_to_dma_pte(struct dmar_domain *domain,
 
 			domain_flush_cache(domain, tmp_page, VTD_PAGE_SIZE);
 			pteval = ((uint64_t)virt_to_dma_pfn(tmp_page) << VTD_PAGE_SHIFT) | DMA_PTE_READ | DMA_PTE_WRITE;
-			if (domain_use_first_level(domain))
+			if (domain_use_first_level(domain)) {
 				pteval |= DMA_FL_PTE_XD | DMA_FL_PTE_US;
+				if (domain->domain.type == IOMMU_DOMAIN_DMA)
+					pteval |= DMA_FL_PTE_ACCESS;
+			}
 			if (cmpxchg64(&pte->val, 0ULL, pteval))
 				/* Someone else set it while we were thinking; use theirs. */
 				free_pgtable_page(tmp_page);
@@ -2354,14 +2357,18 @@ static int __domain_mapping(struct dmar_domain *domain, unsigned long iov_pfn,
 		return -EINVAL;
 
 	attr = prot & (DMA_PTE_READ | DMA_PTE_WRITE | DMA_PTE_SNP);
-	if (domain_use_first_level(domain))
+	if (domain_use_first_level(domain)) {
 		attr |= DMA_FL_PTE_PRESENT | DMA_FL_PTE_XD | DMA_FL_PTE_US;
 
-	if (!sg) {
-		sg_res = nr_pages;
-		pteval = ((phys_addr_t)phys_pfn << VTD_PAGE_SHIFT) | attr;
+		if (domain->domain.type == IOMMU_DOMAIN_DMA) {
+			attr |= DMA_FL_PTE_ACCESS;
+			if (prot & DMA_PTE_WRITE)
+				attr |= DMA_FL_PTE_DIRTY;
+		}
 	}
 
+	pteval = ((phys_addr_t)phys_pfn << VTD_PAGE_SHIFT) | attr;
+
 	while (nr_pages > 0) {
 		uint64_t tmp;
 
diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h
index 94522685a0d9..ccaa057faf8c 100644
--- a/include/linux/intel-iommu.h
+++ b/include/linux/intel-iommu.h
@@ -42,6 +42,8 @@
 
 #define DMA_FL_PTE_PRESENT	BIT_ULL(0)
 #define DMA_FL_PTE_US		BIT_ULL(2)
+#define DMA_FL_PTE_ACCESS	BIT_ULL(5)
+#define DMA_FL_PTE_DIRTY	BIT_ULL(6)
 #define DMA_FL_PTE_XD		BIT_ULL(63)
 
 #define ADDR_WIDTH_5LEVEL	(57)
-- 
2.30.2






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux