From: Shawn Guo <shawn.guo@xxxxxxxxxx>
[ Upstream commit de3abdf3d15c6e7f456e2de3f9da78f3a31414cc ]
The last cell of 'gpio-ranges' should be number of GPIO pins, and in
case of qcom platform it should match msm_pinctrl_soc_data.ngpio rather
than msm_pinctrl_soc_data.ngpio - 1.
This fixes the problem that when the last GPIO pin in the range is
configured with the following call sequence, it always fails with
-EPROBE_DEFER.
pinctrl_gpio_set_config()
pinctrl_get_device_gpio_range()
pinctrl_match_gpio_range()
Fixes: e13c6d144fa0 ("arm64: dts: qcom: sm8150: Add base dts file")
Cc: Vinod Koul <vkoul@xxxxxxxxxx>
Signed-off-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20210303033106.549-3-shawn.guo@xxxxxxxxxx
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8150.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index f0a872e02686..1aec54590a11 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -748,7 +748,7 @@
<0x0 0x03D00000 0x0 0x300000>;
reg-names = "west", "east", "north", "south";
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- gpio-ranges = <&tlmm 0 0 175>;
+ gpio-ranges = <&tlmm 0 0 176>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
--
2.30.2
