From: Johan Hovold <johan@xxxxxxxxxx>
commit 3d732690d2267f4d0e19077b178dffbedafdf0c9 upstream.
The port close_delay and closing_wait parameters set by TIOCSSERIAL are
specified in jiffies and not milliseconds.
Add the missing conversions so that the TIOCSSERIAL works as expected
also when HZ is not 1000.
Fixes: 02303f73373a ("usb-wwan: implement TIOCGSERIAL and TIOCSSERIAL to avoid blocking close(2)")
Cc: stable@xxxxxxxxxxxxxxx # 2.6.38
Reviewed-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/serial/usb_wwan.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -140,10 +140,10 @@ int usb_wwan_get_serial_info(struct tty_
ss->line = port->minor;
ss->port = port->port_number;
ss->baud_base = tty_get_baud_rate(port->port.tty);
- ss->close_delay = port->port.close_delay / 10;
+ ss->close_delay = jiffies_to_msecs(port->port.close_delay) / 10;
ss->closing_wait = port->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
ASYNC_CLOSING_WAIT_NONE :
- port->port.closing_wait / 10;
+ jiffies_to_msecs(port->port.closing_wait) / 10;
return 0;
}
EXPORT_SYMBOL(usb_wwan_get_serial_info);
@@ -155,9 +155,10 @@ int usb_wwan_set_serial_info(struct tty_
unsigned int closing_wait, close_delay;
int retval = 0;
- close_delay = ss->close_delay * 10;
+ close_delay = msecs_to_jiffies(ss->close_delay * 10);
closing_wait = ss->closing_wait == ASYNC_CLOSING_WAIT_NONE ?
- ASYNC_CLOSING_WAIT_NONE : ss->closing_wait * 10;
+ ASYNC_CLOSING_WAIT_NONE :
+ msecs_to_jiffies(ss->closing_wait * 10);
mutex_lock(&port->port.mutex);
