Re: [PATCH] KVM: lapic: sync highest ISR to hardware apic on EOI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, May 23, 2014 at 04:51:53PM +0200, Paolo Bonzini wrote:
> When Hyper-V enlightenments are in effect, Windows prefers to issue an
> Hyper-V MSR write to issue an EOI rather than an x2apic MSR write.
> The Hyper-V MSR write is not handled by the processor, and besides
> being slower, this also causes bugs with APIC virtualization.  The
> reason is that on EOI the processor will modify the highest in-service
> interrupt (SVI) field of the VMCS, as explained in section 29.1.4 of
> the SDM.
> 
> We need to do the same, and be careful not to muck with the isr_count
> and highest_isr_cache fields that are unused when virtual interrupt
> delivery is enabled.
> 
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Paolo Bonzini <pbonzini@xxxxxxxxxx>

FWIW

Acked-by: Michael S. Tsirkin <mst@xxxxxxxxxx>

some questions below.


> ---
>  arch/x86/kvm/lapic.c |   62 ++++++++++++++++++++++++++++++++++---------------
>  1 files changed, 43 insertions(+), 19 deletions(-)
> 
> diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
> index 9736529..0069118 100644
> --- a/arch/x86/kvm/lapic.c
> +++ b/arch/x86/kvm/lapic.c
> @@ -360,6 +360,8 @@ static inline void apic_clear_irr(int vec, struct kvm_lapic *apic)
>  
>  static inline void apic_set_isr(int vec, struct kvm_lapic *apic)
>  {
> +	/* Note that we never get here with APIC virtualization enabled.  */
> +
>  	if (!__apic_test_and_set_vector(vec, apic->regs + APIC_ISR))
>  		++apic->isr_count;
>  	BUG_ON(apic->isr_count > MAX_APIC_VECTOR);
> @@ -371,12 +373,48 @@ static inline void apic_set_isr(int vec, struct kvm_lapic *apic)
>  	apic->highest_isr_cache = vec;
>  }
>  
> +static inline int apic_find_highest_isr(struct kvm_lapic *apic)
> +{
> +	int result;
> +
> +	/*
> +	 * Note that isr_count is always 1, and highest_isr_cache
> +	 * is always -1, with APIC virtualization enabled.
> +	 */
> +	if (!apic->isr_count)
> +		return -1;
> +	if (likely(apic->highest_isr_cache != -1))
> +		return apic->highest_isr_cache;
> +
> +	result = find_highest_vector(apic->regs + APIC_ISR);
> +	ASSERT(result == -1 || result >= 16);
> +
> +	return result;
> +}
> +
>  static inline void apic_clear_isr(int vec, struct kvm_lapic *apic)
>  {
> -	if (__apic_test_and_clear_vector(vec, apic->regs + APIC_ISR))
> +	struct kvm_vcpu *vcpu;
> +	if (!__apic_test_and_clear_vector(vec, apic->regs + APIC_ISR))
> +		return;
> +
> +	vcpu = apic->vcpu;
> +
> +	/*
> +	 * We do get here for APIC virtualization enabled if the guest
> +	 * uses the Hyper-V APIC enlightenment.  In this case we may need
> +	 * to trigger a new interrupt delivery by writing the SVI field;
> +	 * on the other hand isr_count and highest_isr_cache are unused
> +	 * and must be left alone.
> +	 */
> +	if (unlikely(kvm_apic_vid_enabled(vcpu->kvm)))
> +		kvm_x86_ops->hwapic_isr_update(vcpu->kvm,
> +					       apic_find_highest_isr(apic));

I note that an indirect call on data path is mostly unnecessary here:
	static int vmx_vm_has_apicv(struct kvm *kvm)
	{
		return enable_apicv && irqchip_in_kernel(kvm);
	}
is all it does, and irqchip_in_kernel also has an rmb within it, which
is somewhat expensive on x86: and there's no way to reach this code
with irqchip disabled, correct?

So this is penalizing non-apicv boxes.

How about adding a bool flag in kvm_vcpu_arch, and testing that?
Or even move the enable_apicv module parameter to x86.

> +	else {
>  		--apic->isr_count;
> -	BUG_ON(apic->isr_count < 0);
> -	apic->highest_isr_cache = -1;
> +		BUG_ON(apic->isr_count < 0);
> +		apic->highest_isr_cache = -1;
> +	}
>  }
>  
>  int kvm_lapic_find_highest_irr(struct kvm_vcpu *vcpu)
> @@ -456,22 +494,6 @@ static void pv_eoi_clr_pending(struct kvm_vcpu *vcpu)
>  	__clear_bit(KVM_APIC_PV_EOI_PENDING, &vcpu->arch.apic_attention);
>  }
>  
> -static inline int apic_find_highest_isr(struct kvm_lapic *apic)
> -{
> -	int result;
> -
> -	/* Note that isr_count is always 1 with vid enabled */
> -	if (!apic->isr_count)
> -		return -1;
> -	if (likely(apic->highest_isr_cache != -1))
> -		return apic->highest_isr_cache;
> -
> -	result = find_highest_vector(apic->regs + APIC_ISR);
> -	ASSERT(result == -1 || result >= 16);
> -
> -	return result;
> -}
> -
>  void kvm_apic_update_tmr(struct kvm_vcpu *vcpu, u32 *tmr)
>  {
>  	struct kvm_lapic *apic = vcpu->arch.apic;
> @@ -1605,6 +1627,8 @@ int kvm_get_apic_interrupt(struct kvm_vcpu *vcpu)
>  	int vector = kvm_apic_has_interrupt(vcpu);
>  	struct kvm_lapic *apic = vcpu->arch.apic;
>  
> +	/* Note that we never get here with APIC virtualization enabled.  */
> +
>  	if (vector == -1)
>  		return -1;
>  
> -- 
> 1.7.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
> 
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]