From: Maximilian Luz <luzmaximilian@xxxxxxxxx> On some devices (specifically the SC8180x based Surface Pro X with QCOM04A6) HC halt / xhci_halt() times out during boot. Manually binding the xhci-hcd driver at some point later does not exhibit this behavior. To work around this, double XHCI_MAX_HALT_USEC, which also resolves this issue. Cc: <stable@xxxxxxxxxxxxxxx> Signed-off-by: Maximilian Luz <luzmaximilian@xxxxxxxxx> Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx> --- drivers/usb/host/xhci-ext-caps.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h index fa59b242cd51..e8af0a125f84 100644 --- a/drivers/usb/host/xhci-ext-caps.h +++ b/drivers/usb/host/xhci-ext-caps.h @@ -7,8 +7,9 @@ * Author: Sarah Sharp * Some code borrowed from the Linux EHCI driver. */ -/* Up to 16 ms to halt an HC */ -#define XHCI_MAX_HALT_USEC (16*1000) + +/* HC should halt within 16 ms, but use 32 ms as some hosts take longer */ +#define XHCI_MAX_HALT_USEC (32 * 1000) /* HC not running - set to 1 when run/stop bit is cleared. */ #define XHCI_STS_HALT (1<<0) -- 2.25.1
