From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx> [ Upstream commit ca7a049ad1a72ec5f03d1330b53575237fcb727c ] Having a button code and not a key code causes issues with libinput. udev won't set ID_INPUT_KEY. If it is forced, then it causes a bug within libinput. Signed-off-by: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx> Signed-off-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20210402130227.21478-1-nicolas.ferre@xxxxxxxxxxxxx Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- arch/arm/boot/dts/at91-sam9x60ek.dts | 3 ++- arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 3 ++- arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts | 3 ++- arch/arm/boot/dts/at91-sama5d2_icp.dts | 3 ++- arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 3 ++- arch/arm/boot/dts/at91-sama5d2_xplained.dts | 3 ++- arch/arm/boot/dts/at91-sama5d3_xplained.dts | 3 ++- arch/arm/boot/dts/at91sam9260ek.dts | 3 ++- arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 3 ++- 9 files changed, 18 insertions(+), 9 deletions(-) diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts index 775ceb3acb6c..edca66c232c1 100644 --- a/arch/arm/boot/dts/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts @@ -8,6 +8,7 @@ */ /dts-v1/; #include "sam9x60.dtsi" +#include <dt-bindings/input/input.h> / { model = "Microchip SAM9X60-EK"; @@ -84,7 +85,7 @@ sw1 { label = "SW1"; gpios = <&pioD 18 GPIO_ACTIVE_LOW>; - linux,code=<0x104>; + linux,code=<KEY_PROG1>; wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts index 0e159f879c15..d3cd2443ba25 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts @@ -11,6 +11,7 @@ #include "at91-sama5d27_som1.dtsi" #include <dt-bindings/mfd/atmel-flexcom.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "Atmel SAMA5D27 SOM1 EK"; @@ -467,7 +468,7 @@ pb4 { label = "USER"; gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>; - linux,code = <0x104>; + linux,code = <KEY_PROG1>; wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts index 6b38fa3f5568..4883b84b4ede 100644 --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts @@ -8,6 +8,7 @@ */ /dts-v1/; #include "at91-sama5d27_wlsom1.dtsi" +#include <dt-bindings/input/input.h> / { model = "Microchip SAMA5D27 WLSOM1 EK"; @@ -35,7 +36,7 @@ sw4 { label = "USER BUTTON"; gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>; - linux,code = <0x104>; + linux,code = <KEY_PROG1>; wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts index 6783cf16ff81..19bb50f50c1f 100644 --- a/arch/arm/boot/dts/at91-sama5d2_icp.dts +++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts @@ -12,6 +12,7 @@ #include "sama5d2.dtsi" #include "sama5d2-pinfunc.h" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/mfd/atmel-flexcom.h> / { @@ -51,7 +52,7 @@ sw4 { label = "USER_PB1"; gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>; - linux,code = <0x104>; + linux,code = <KEY_PROG1>; wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts index c894c7c788a9..1c6361ba1aca 100644 --- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts @@ -11,6 +11,7 @@ #include "sama5d2-pinfunc.h" #include <dt-bindings/mfd/atmel-flexcom.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/at91.h> / { @@ -403,7 +404,7 @@ bp1 { label = "PB_USER"; gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>; - linux,code = <0x104>; + linux,code = <KEY_PROG1>; wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 058fae1b4a76..d767968ae217 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -10,6 +10,7 @@ #include "sama5d2-pinfunc.h" #include <dt-bindings/mfd/atmel-flexcom.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/regulator/active-semi,8945a-regulator.h> / { @@ -713,7 +714,7 @@ bp1 { label = "PB_USER"; gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>; - linux,code = <0x104>; + linux,code = <KEY_PROG1>; wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index 5179258f9247..9c55a921263b 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -7,6 +7,7 @@ */ /dts-v1/; #include "sama5d36.dtsi" +#include <dt-bindings/input/input.h> / { model = "SAMA5D3 Xplained"; @@ -354,7 +355,7 @@ bp3 { label = "PB_USER"; gpios = <&pioE 29 GPIO_ACTIVE_LOW>; - linux,code = <0x104>; + linux,code = <KEY_PROG1>; wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts index d3446e42b598..ce96345d28a3 100644 --- a/arch/arm/boot/dts/at91sam9260ek.dts +++ b/arch/arm/boot/dts/at91sam9260ek.dts @@ -7,6 +7,7 @@ */ /dts-v1/; #include "at91sam9260.dtsi" +#include <dt-bindings/input/input.h> / { model = "Atmel at91sam9260ek"; @@ -156,7 +157,7 @@ btn4 { label = "Button 4"; gpios = <&pioA 31 GPIO_ACTIVE_LOW>; - linux,code = <0x104>; + linux,code = <KEY_PROG1>; wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index 6e6e672c0b86..87bb39060e8b 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -5,6 +5,7 @@ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx> */ #include "at91sam9g20.dtsi" +#include <dt-bindings/input/input.h> / { @@ -234,7 +235,7 @@ btn4 { label = "Button 4"; gpios = <&pioA 31 GPIO_ACTIVE_LOW>; - linux,code = <0x104>; + linux,code = <KEY_PROG1>; wakeup-source; }; }; -- 2.30.2
