From: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@xxxxxxx>
[ Upstream commit a362b0cc94d476b097ba0ff466958c1d4e27e219 ]
Commit 99e71c029213 ("arm64: dts: imx8mq-librem5: Don't mark buck3 as always on")
removed always-on marking from GPU regulator, which is great for power
saving - however it introduces additional i2c0 traffic which can be deadly
for devices from the Dogwood batch.
To workaround the i2c0 shutdown issue on Dogwood, this commit marks
buck3 as always-on again - but only for Dogwood (r3).
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@xxxxxxx>
Signed-off-by: Martin Kepplinger <martin.kepplinger@xxxxxxx>
Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
index 6704ea2c72a3..cc29223ca188 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
@@ -22,6 +22,10 @@
ti,termination-current = <144000>; /* uA */
};
+&buck3_reg {
+ regulator-always-on;
+};
+
&proximity {
proximity-near-level = <25>;
};
--
2.30.2
