[PATCH 5.4 112/184] media: gscpa/stv06xx: fix memory leak

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>

[ Upstream commit 4f4e6644cd876c844cdb3bea2dd7051787d5ae25 ]

For two of the supported sensors the stv06xx driver allocates memory which
is stored in sd->sensor_priv. This memory is freed on a disconnect, but if
the probe() fails, then it isn't freed and so this leaks memory.

Add a new probe_error() op that drivers can use to free any allocated
memory in case there was a probe failure.

Thanks to Pavel Skripkin <paskripkin@xxxxxxxxx> for discovering the cause
of the memory leak.

Reported-and-tested-by: syzbot+e7f4c64a4248a0340c37@xxxxxxxxxxxxxxxxxxxxxxxxx

Signed-off-by: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/media/usb/gspca/gspca.c           | 2 ++
 drivers/media/usb/gspca/gspca.h           | 1 +
 drivers/media/usb/gspca/stv06xx/stv06xx.c | 9 +++++++++
 3 files changed, 12 insertions(+)

diff --git a/drivers/media/usb/gspca/gspca.c b/drivers/media/usb/gspca/gspca.c
index 4210826cc910..e4d78e676e74 100644
--- a/drivers/media/usb/gspca/gspca.c
+++ b/drivers/media/usb/gspca/gspca.c
@@ -1576,6 +1576,8 @@ out:
 #endif
 	v4l2_ctrl_handler_free(gspca_dev->vdev.ctrl_handler);
 	v4l2_device_unregister(&gspca_dev->v4l2_dev);
+	if (sd_desc->probe_error)
+		sd_desc->probe_error(gspca_dev);
 	kfree(gspca_dev->usb_buf);
 	kfree(gspca_dev);
 	return ret;
diff --git a/drivers/media/usb/gspca/gspca.h b/drivers/media/usb/gspca/gspca.h
index b0ced2e14006..a6554d5e9e1a 100644
--- a/drivers/media/usb/gspca/gspca.h
+++ b/drivers/media/usb/gspca/gspca.h
@@ -105,6 +105,7 @@ struct sd_desc {
 	cam_cf_op config;	/* called on probe */
 	cam_op init;		/* called on probe and resume */
 	cam_op init_controls;	/* called on probe */
+	cam_v_op probe_error;	/* called if probe failed, do cleanup here */
 	cam_op start;		/* called on stream on after URBs creation */
 	cam_pkt_op pkt_scan;
 /* optional operations */
diff --git a/drivers/media/usb/gspca/stv06xx/stv06xx.c b/drivers/media/usb/gspca/stv06xx/stv06xx.c
index 95673fc0a99c..d9bc2aacc885 100644
--- a/drivers/media/usb/gspca/stv06xx/stv06xx.c
+++ b/drivers/media/usb/gspca/stv06xx/stv06xx.c
@@ -529,12 +529,21 @@ static int sd_int_pkt_scan(struct gspca_dev *gspca_dev,
 static int stv06xx_config(struct gspca_dev *gspca_dev,
 			  const struct usb_device_id *id);
 
+static void stv06xx_probe_error(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *)gspca_dev;
+
+	kfree(sd->sensor_priv);
+	sd->sensor_priv = NULL;
+}
+
 /* sub-driver description */
 static const struct sd_desc sd_desc = {
 	.name = MODULE_NAME,
 	.config = stv06xx_config,
 	.init = stv06xx_init,
 	.init_controls = stv06xx_init_controls,
+	.probe_error = stv06xx_probe_error,
 	.start = stv06xx_start,
 	.stopN = stv06xx_stopN,
 	.pkt_scan = stv06xx_pkt_scan,
-- 
2.30.2






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux