From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx> [ Upstream commit 71ca43f30df9c642970f9dc9b2d6f463f4967e7b ] The current dwc3_gadget_reset_interrupt() will stop any active transfers, but only addresses blocking of EP queuing for while we are coming from a disconnected scenario, i.e. after receiving the disconnect event. If the host decides to issue a bus reset on the device, the connected parameter will still be set to true, allowing for EP queuing to continue while we are disabling the functions. To avoid this, set the connected flag to false until the stop active transfers is complete. Signed-off-by: Wesley Cheng <wcheng@xxxxxxxxxxxxxx> Link: https://lore.kernel.org/r/1616146285-19149-3-git-send-email-wcheng@xxxxxxxxxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/usb/dwc3/gadget.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 510ed406fb0b..909e8aafd580 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2695,6 +2695,15 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc) dwc->connected = true; + /* + * Ideally, dwc3_reset_gadget() would trigger the function + * drivers to stop any active transfers through ep disable. + * However, for functions which defer ep disable, such as mass + * storage, we will need to rely on the call to stop active + * transfers here, and avoid allowing of request queuing. + */ + dwc->connected = false; + /* * WORKAROUND: DWC3 revisions <1.88a have an issue which * would cause a missing Disconnect Event if there's a -- 2.30.2
