Re: [PATCH] net: phy: marvell: fix detection of PHY on Topaz switches

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Apr 19, 2021 at 02:08:56PM +0200, Pali Rohár wrote:
> On Monday 19 April 2021 14:05:18 Greg KH wrote:
> > On Sun, Apr 18, 2021 at 03:13:44PM +0200, Pali Rohár wrote:
> > > commit 1fe976d308acb6374c899a4ee8025a0a016e453e upstream.
> > > 
> > > Since commit fee2d546414d ("net: phy: marvell: mv88e6390 temperature
> > > sensor reading"), Linux reports the temperature of Topaz hwmon as
> > > constant -75°C.
> > > 
> > > This is because switches from the Topaz family (88E6141 / 88E6341) have
> > > the address of the temperature sensor register different from Peridot.
> > > 
> > > This address is instead compatible with 88E1510 PHYs, as was used for
> > > Topaz before the above mentioned commit.
> > > 
> > > Create a new mapping table between switch family and PHY ID for families
> > > which don't have a model number. And define PHY IDs for Topaz and Peridot
> > > families.
> > > 
> > > Create a new PHY ID and a new PHY driver for Topaz's internal PHY.
> > > The only difference from Peridot's PHY driver is the HWMON probing
> > > method.
> > > 
> > > Prior this change Topaz's internal PHY is detected by kernel as:
> > > 
> > >   PHY [...] driver [Marvell 88E6390] (irq=63)
> > > 
> > > And afterwards as:
> > > 
> > >   PHY [...] driver [Marvell 88E6341 Family] (irq=63)
> > > 
> > > Signed-off-by: Pali Rohár <pali@xxxxxxxxxx>
> > > BugLink: https://github.com/globalscaletechnologies/linux/issues/1
> > > Fixes: fee2d546414d ("net: phy: marvell: mv88e6390 temperature sensor reading")
> > > Reviewed-by: Marek Behún <kabel@xxxxxxxxxx>
> > > Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
> > > Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
> > > [pali: Backported to 5.4 version]
> > > ---
> > > This patch is backported to 5.4 version. Tested on Turris Mox with Topaz switch.
> > 
> > What about a 5.10 version?
> 
> Is manual backport required also for 5.10? I got email that automatic
> backporting failed only for 4.19 and 5.4 versions.

It also failed for 5.10.y, so yes, if you could provide a version for
that tree it would be most appreciated.

thanks,

greg k-h



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux