From: Florian Fainelli <f.fainelli@xxxxxxxxx>
commit c056d480b40a68f2520ccc156c7fae672d69d57d upstream
We should not be advertising EEE for modes that we do not support,
correct that oversight by looking at the PHY device supported linkmodes.
Fixes: 99cec8a4dda2 ("net: phy: broadcom: Allow enabling or disabling of EEE")
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/net/phy/bcm-phy-lib.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/net/phy/bcm-phy-lib.c b/drivers/net/phy/bcm-phy-lib.c
index d5e0833d69b9..66e4ef8ed345 100644
--- a/drivers/net/phy/bcm-phy-lib.c
+++ b/drivers/net/phy/bcm-phy-lib.c
@@ -198,7 +198,7 @@ EXPORT_SYMBOL_GPL(bcm_phy_enable_apd);
int bcm_phy_set_eee(struct phy_device *phydev, bool enable)
{
- int val;
+ int val, mask = 0;
/* Enable EEE at PHY level */
val = phy_read_mmd(phydev, MDIO_MMD_AN, BRCM_CL45VEN_EEE_CONTROL);
@@ -217,10 +217,15 @@ int bcm_phy_set_eee(struct phy_device *phydev, bool enable)
if (val < 0)
return val;
+ if (phydev->supported & SUPPORTED_1000baseT_Full)
+ mask |= MDIO_EEE_1000T;
+ if (phydev->supported & SUPPORTED_100baseT_Full)
+ mask |= MDIO_EEE_100TX;
+
if (enable)
- val |= (MDIO_EEE_100TX | MDIO_EEE_1000T);
+ val |= mask;
else
- val &= ~(MDIO_EEE_100TX | MDIO_EEE_1000T);
+ val &= ~mask;
phy_write_mmd(phydev, MDIO_MMD_AN, BCM_CL45VEN_EEE_ADV, (u32)val);
--
2.30.2
