From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
[ Upstream commit 967ff33eb0efcd48e4df11ab9aee51c41e0f44d0 ]
The driver part of this support was not merged which leads to break
AHCI on all Marvell Armada 7k8k / CN913x platforms as it was reported
by Marcin Wojtas.
So for now let's remove it in order to fix the issue waiting for the
driver part really be merged.
This reverts commit 53e950d597e3578da84238b86424bfcc9e101d87.
Fixes: 53e950d597e3 ("arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts")
Signed-off-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
index 994a2fce449a..1e37ae181acf 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
@@ -300,9 +300,11 @@
};
CP11X_LABEL(sata0): sata@540000 {
- compatible = "marvell,armada-8k-ahci";
+ compatible = "marvell,armada-8k-ahci",
+ "generic-ahci";
reg = <0x540000 0x30000>;
dma-coherent;
+ interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&CP11X_LABEL(clk) 1 15>,
<&CP11X_LABEL(clk) 1 16>;
#address-cells = <1>;
@@ -310,12 +312,10 @@
status = "disabled";
sata-port@0 {
- interrupts = <109 IRQ_TYPE_LEVEL_HIGH>;
reg = <0>;
};
sata-port@1 {
- interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
reg = <1>;
};
};
--
2.30.2
