Hi Greg, On 4/8/2021 11:28, Artur Petrosyan wrote: > This patch set fixes and improves the Partial Power Down mode for > dwc2 core. > It adds support for the following cases > 1. Entering and exiting partial power down when a port is > suspended, resumed, port reset is asserted. > 2. Exiting the partial power down mode before removing driver. > 3. Exiting partial power down in wakeup detected interrupt handler. > 4. Exiting from partial power down mode when connector ID. > status changes to "connId B > > It updates and fixes the implementation of dwc2 entering and > exiting partial power down mode when the system (PC) is suspended. > > The patch set also improves the implementation of function handlers > for entering and exiting host or device partial power down. > > NOTE: This is the second patch set in the power saving mode fixes > series. > This patch set is part of multiple series and is continuation > of the "usb: dwc2: Fix and improve power saving modes" patch set. > (Patch set link: https://marc.info/?l=linux-usb&m=160379622403975&w=2). > The patches that were included in the "usb: dwc2: > Fix and improve power saving modes" which was submitted > earlier was too large and needed to be split up into > smaller patch sets. > > Changes since V1: > No changes in the patches or the source code. > Sending the second version of the patch set because the first version > was not received by vger.kernel.org. > > > > Artur Petrosyan (14): > usb: dwc2: Add device partial power down functions > usb: dwc2: Add host partial power down functions > usb: dwc2: Update enter and exit partial power down functions > usb: dwc2: Add partial power down exit flow in wakeup intr. > usb: dwc2: Update port suspend/resume function definitions. > usb: dwc2: Add enter partial power down when port is suspended > usb: dwc2: Add exit partial power down when port is resumed > usb: dwc2: Add exit partial power down when port reset is asserted > usb: dwc2: Add part. power down exit from > dwc2_conn_id_status_change(). > usb: dwc2: Allow exit partial power down in urb enqueue > usb: dwc2: Fix session request interrupt handler > usb: dwc2: Update partial power down entering by system suspend > usb: dwc2: Fix partial power down exiting by system resume > usb: dwc2: Add exit partial power down before removing driver > > drivers/usb/dwc2/core.c | 113 ++------- > drivers/usb/dwc2/core.h | 27 ++- > drivers/usb/dwc2/core_intr.c | 46 ++-- > drivers/usb/dwc2/gadget.c | 148 ++++++++++- > drivers/usb/dwc2/hcd.c | 458 +++++++++++++++++++++++++---------- > drivers/usb/dwc2/hw.h | 1 + > drivers/usb/dwc2/platform.c | 11 +- > 7 files changed, 558 insertions(+), 246 deletions(-) > > > base-commit: e9fcb07704fcef6fa6d0333fd2b3a62442eaf45b > Re sending as a "v2" did not work :(. The patches are not in lore again. Could the issue be with a comma in the end of To: or Cc: list? Let me remove the comma in the end of those lists and try sending as "v3". Regards, Artur
