On Thu, Apr 08, 2021 at 05:57:57AM +0000, Artur Petrosyan wrote: > Hi Greg, > > On 4/7/2021 14:00, Artur Petrosyan wrote: > > This patch set fixes and improves the Partial Power Down mode for > > dwc2 core. > > It adds support for the following cases > > 1. Entering and exiting partial power down when a port is > > suspended, resumed, port reset is asserted. > > 2. Exiting the partial power down mode before removing driver. > > 3. Exiting partial power down in wakeup detected interrupt handler. > > 4. Exiting from partial power down mode when connector ID. > > status changes to "connId B > > > > It updates and fixes the implementation of dwc2 entering and > > exiting partial power down mode when the system (PC) is suspended. > > > > The patch set also improves the implementation of function handlers > > for entering and exiting host or device partial power down. > > > > NOTE: This is the second patch set in the power saving mode fixes > > series. > > This patch set is part of multiple series and is continuation > > of the "usb: dwc2: Fix and improve power saving modes" patch set. > > (Patch set link: https://marc.info/?l=linux-usb&m=160379622403975&w=2). > > The patches that were included in the "usb: dwc2: > > Fix and improve power saving modes" which was submitted > > earlier was too large and needed to be split up into > > smaller patch sets. > > > > > > Artur Petrosyan (14): > > usb: dwc2: Add device partial power down functions > > usb: dwc2: Add host partial power down functions > > usb: dwc2: Update enter and exit partial power down functions > > usb: dwc2: Add partial power down exit flow in wakeup intr. > > usb: dwc2: Update port suspend/resume function definitions. > > usb: dwc2: Add enter partial power down when port is suspended > > usb: dwc2: Add exit partial power down when port is resumed > > usb: dwc2: Add exit partial power down when port reset is asserted > > usb: dwc2: Add part. power down exit from > > dwc2_conn_id_status_change(). > > usb: dwc2: Allow exit partial power down in urb enqueue > > usb: dwc2: Fix session request interrupt handler > > usb: dwc2: Update partial power down entering by system suspend > > usb: dwc2: Fix partial power down exiting by system resume > > usb: dwc2: Add exit partial power down before removing driver > > > > drivers/usb/dwc2/core.c | 113 ++------- > > drivers/usb/dwc2/core.h | 27 ++- > > drivers/usb/dwc2/core_intr.c | 46 ++-- > > drivers/usb/dwc2/gadget.c | 148 ++++++++++- > > drivers/usb/dwc2/hcd.c | 458 +++++++++++++++++++++++++---------- > > drivers/usb/dwc2/hw.h | 1 + > > drivers/usb/dwc2/platform.c | 11 +- > > 7 files changed, 558 insertions(+), 246 deletions(-) > > > > > > base-commit: e9fcb07704fcef6fa6d0333fd2b3a62442eaf45b > > > I have submitted this patch set yesterday. It contains 14 patches. But > only 2 of those patches were received by LKML only the cover letter and > the 13th patch. > (https://lore.kernel.org/linux-usb/cover.1617782102.git.Arthur.Petrosyan@xxxxxxxxxxxx/T/#t) > > I checked here at Synopsys, Minas did receive all the patches as his > email is in To list. Could this be an issue of vger.kernel.org mailing > server? > > Because I checked every local possibility that could result to such > behavior. The patch 13 which was received by LKML has the similar > content as the other patches. > > The mailing tool that was used is ssmtp, checked all the configurations > everything is fine. > > Could you please suggest what should I do in this situation? Odd, I got them here, but lore seems to not have them :( Can you just resend them as a "v2" series so we know which to review and let's see if that works better... thanks, greg k-h
