[PATCH 5.11 217/254] net: phy: broadcom: Avoid forward for bcm54xx_config_clock_delay()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Florian Fainelli <f.fainelli@xxxxxxxxx>

[ Upstream commit 133bf7b4fbbe58cff5492e37e95e75c88161f1b8 ]

Avoid a forward declaration by moving the callers of
bcm54xx_config_clock_delay() below its body.

Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Reviewed-by: Vladimir Oltean <olteanv@xxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/net/phy/broadcom.c | 74 +++++++++++++++++++-------------------
 1 file changed, 36 insertions(+), 38 deletions(-)

diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 48024ac85980..407626ddcae7 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -26,44 +26,6 @@ MODULE_DESCRIPTION("Broadcom PHY driver");
 MODULE_AUTHOR("Maciej W. Rozycki");
 MODULE_LICENSE("GPL");
 
-static int bcm54xx_config_clock_delay(struct phy_device *phydev);
-
-static int bcm54210e_config_init(struct phy_device *phydev)
-{
-	int val;
-
-	bcm54xx_config_clock_delay(phydev);
-
-	if (phydev->dev_flags & PHY_BRCM_EN_MASTER_MODE) {
-		val = phy_read(phydev, MII_CTRL1000);
-		val |= CTL1000_AS_MASTER | CTL1000_ENABLE_MASTER;
-		phy_write(phydev, MII_CTRL1000, val);
-	}
-
-	return 0;
-}
-
-static int bcm54612e_config_init(struct phy_device *phydev)
-{
-	int reg;
-
-	bcm54xx_config_clock_delay(phydev);
-
-	/* Enable CLK125 MUX on LED4 if ref clock is enabled. */
-	if (!(phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED)) {
-		int err;
-
-		reg = bcm_phy_read_exp(phydev, BCM54612E_EXP_SPARE0);
-		err = bcm_phy_write_exp(phydev, BCM54612E_EXP_SPARE0,
-					BCM54612E_LED4_CLK125OUT_EN | reg);
-
-		if (err < 0)
-			return err;
-	}
-
-	return 0;
-}
-
 static int bcm54xx_config_clock_delay(struct phy_device *phydev)
 {
 	int rc, val;
@@ -105,6 +67,42 @@ static int bcm54xx_config_clock_delay(struct phy_device *phydev)
 	return 0;
 }
 
+static int bcm54210e_config_init(struct phy_device *phydev)
+{
+	int val;
+
+	bcm54xx_config_clock_delay(phydev);
+
+	if (phydev->dev_flags & PHY_BRCM_EN_MASTER_MODE) {
+		val = phy_read(phydev, MII_CTRL1000);
+		val |= CTL1000_AS_MASTER | CTL1000_ENABLE_MASTER;
+		phy_write(phydev, MII_CTRL1000, val);
+	}
+
+	return 0;
+}
+
+static int bcm54612e_config_init(struct phy_device *phydev)
+{
+	int reg;
+
+	bcm54xx_config_clock_delay(phydev);
+
+	/* Enable CLK125 MUX on LED4 if ref clock is enabled. */
+	if (!(phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED)) {
+		int err;
+
+		reg = bcm_phy_read_exp(phydev, BCM54612E_EXP_SPARE0);
+		err = bcm_phy_write_exp(phydev, BCM54612E_EXP_SPARE0,
+					BCM54612E_LED4_CLK125OUT_EN | reg);
+
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+
 /* Needs SMDSP clock enabled via bcm54xx_phydsp_config() */
 static int bcm50610_a0_workaround(struct phy_device *phydev)
 {
-- 
2.30.1






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux