From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
commit 221c3a09ddf70a0a51715e6c2878d8305e95c558 upstream.
Fix the phy address to 7 for Ethernet PHY on SAMA5D27 SOM1. No
connection established if phy address 0 is used.
The board uses the 24 pins version of the KSZ8081RNA part, KSZ8081RNA
pin 16 REFCLK as PHYAD bit [2] has weak internal pull-down. But at
reset, connected to PD09 of the MPU it's connected with an internal
pull-up forming PHYAD[2:0] = 7.
Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
Fixes: 2f61929eb10a ("ARM: dts: at91: at91-sama5d27_som1: fix PHY ID")
Cc: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
Signed-off-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx> # 4.14+
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/at91-sama5d27_som1.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
@@ -84,8 +84,8 @@
pinctrl-0 = <&pinctrl_macb0_default>;
phy-mode = "rmii";
- ethernet-phy@0 {
- reg = <0x0>;
+ ethernet-phy@7 {
+ reg = <0x7>;
interrupt-parent = <&pioA>;
interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
