From: Sameer Pujar <spujar@xxxxxxxxxx>
commit 8ca88d53351cc58d535b2bfc7386835378fb0db2 upstream.
This reverts commit 1e30f642cf29 ("ASoC: simple-card-utils: Fix device
module clock"). The original patch ended up breaking following platform,
which depends on set_sysclk() to configure internal PLL on wm8904 codec
and expects simple-card-utils to not update the MCLK rate.
- "arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts"
It would be best if codec takes care of setting MCLK clock via DAI
set_sysclk() callback.
Reported-by: Michael Walle <michael@xxxxxxxx>
Suggested-by: Mark Brown <broonie@xxxxxxxxxx>
Suggested-by: Michael Walle <michael@xxxxxxxx>
Fixes: 1e30f642cf29 ("ASoC: simple-card-utils: Fix device module clock")
Signed-off-by: Sameer Pujar <spujar@xxxxxxxxxx>
Tested-by: Michael Walle <michael@xxxxxxxx>
Link: https://lore.kernel.org/r/1615829492-8972-2-git-send-email-spujar@xxxxxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
sound/soc/generic/simple-card-utils.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
--- a/sound/soc/generic/simple-card-utils.c
+++ b/sound/soc/generic/simple-card-utils.c
@@ -172,15 +172,16 @@ int asoc_simple_parse_clk(struct device
* or device's module clock.
*/
clk = devm_get_clk_from_child(dev, node, NULL);
- if (IS_ERR(clk))
- clk = devm_get_clk_from_child(dev, dlc->of_node, NULL);
-
if (!IS_ERR(clk)) {
- simple_dai->clk = clk;
simple_dai->sysclk = clk_get_rate(clk);
- } else if (!of_property_read_u32(node, "system-clock-frequency",
- &val)) {
+
+ simple_dai->clk = clk;
+ } else if (!of_property_read_u32(node, "system-clock-frequency", &val)) {
simple_dai->sysclk = val;
+ } else {
+ clk = devm_get_clk_from_child(dev, dlc->of_node, NULL);
+ if (!IS_ERR(clk))
+ simple_dai->sysclk = clk_get_rate(clk);
}
if (of_property_read_bool(node, "system-clock-direction-out"))
