When using Clause-22 to probe for PHY devices such as the Marvell 88E2110, PHY ID with value 0 is read from the MII PHYID registers which caused the PHY framework failed to attach the Marvell PHY driver. Fixed this by adding a check of PHY ID equals to all zeroes. Cc: stable@xxxxxxxxxxxxxxx Reviewed-by: Voon Weifeng <voon.weifeng@xxxxxxxxx> Signed-off-by: Wong Vee Khee <vee.khee.wong@xxxxxxxxx> --- drivers/net/phy/phy_device.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index a009d1769b08..f1afc00fcba2 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -820,8 +820,8 @@ static int get_phy_c22_id(struct mii_bus *bus, int addr, u32 *phy_id) *phy_id |= phy_reg; - /* If the phy_id is mostly Fs, there is no device there */ - if ((*phy_id & 0x1fffffff) == 0x1fffffff) + /* If the phy_id is mostly Fs or all zeroes, there is no device there */ + if (((*phy_id & 0x1fffffff) == 0x1fffffff) || (*phy_id == 0)) return -ENODEV; return 0; -- 2.25.1
