From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> From: Pete Zaitcev <zaitcev@xxxxxxxxxx> commit 9de2c43acf37a17dc4c69ff78bb099b80fb74325 upstream. Apparently an application that opens a device and calls select() on it, will hang if the decice is disconnected. It's a little surprising that we had this bug for 15 years, but apparently nobody ever uses select() with a printer: only write() and read(), and those work fine. Well, you can also select() with a timeout. The fix is modeled after devio.c. A few other drivers check the condition first, then do not add the wait queue in case the device is disconnected. We doubt that's completely race-free. So, this patch adds the process first, then locks properly and checks for the disconnect. Reviewed-by: Zqiang <qiang.zhang@xxxxxxxxxxxxx> Signed-off-by: Pete Zaitcev <zaitcev@xxxxxxxxxx> Cc: stable <stable@xxxxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20210303221053.1cf3313e@xxxxxxxxxxxxxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/usb/class/usblp.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -494,16 +494,24 @@ static int usblp_release(struct inode *i /* No kernel lock - fine */ static __poll_t usblp_poll(struct file *file, struct poll_table_struct *wait) { - __poll_t ret; + struct usblp *usblp = file->private_data; + __poll_t ret = 0; unsigned long flags; - struct usblp *usblp = file->private_data; /* Should we check file->f_mode & FMODE_WRITE before poll_wait()? */ poll_wait(file, &usblp->rwait, wait); poll_wait(file, &usblp->wwait, wait); + + mutex_lock(&usblp->mut); + if (!usblp->present) + ret |= EPOLLHUP; + mutex_unlock(&usblp->mut); + spin_lock_irqsave(&usblp->lock, flags); - ret = ((usblp->bidir && usblp->rcomplete) ? EPOLLIN | EPOLLRDNORM : 0) | - ((usblp->no_paper || usblp->wcomplete) ? EPOLLOUT | EPOLLWRNORM : 0); + if (usblp->bidir && usblp->rcomplete) + ret |= EPOLLIN | EPOLLRDNORM; + if (usblp->no_paper || usblp->wcomplete) + ret |= EPOLLOUT | EPOLLWRNORM; spin_unlock_irqrestore(&usblp->lock, flags); return ret; }
