[PATCH 5.4 027/168] net/mlx4_en: update moderation when config reset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

From: Kevin(Yudong) Yang <yyd@xxxxxxxxxx>

commit 00ff801bb8ce6711e919af4530b6ffa14a22390a upstream.

This patch fixes a bug that the moderation config will not be
applied when calling mlx4_en_reset_config. For example, when
turning on rx timestamping, mlx4_en_reset_config() will be called,
causing the NIC to forget previous moderation config.

This fix is in phase with a previous fix:
commit 79c54b6bbf06 ("net/mlx4_en: Fix TX moderation info loss
after set_ringparam is called")

Tested: Before this patch, on a host with NIC using mlx4, run
netserver and stream TCP to the host at full utilization.
$ sar -I SUM 1
                 INTR    intr/s
14:03:56          sum  48758.00

After rx hwtstamp is enabled:
$ sar -I SUM 1
14:10:38          sum 317771.00
We see the moderation is not working properly and issued 7x more
interrupts.

After the patch, and turned on rx hwtstamp, the rate of interrupts
is as expected:
$ sar -I SUM 1
14:52:11          sum  49332.00

Fixes: 79c54b6bbf06 ("net/mlx4_en: Fix TX moderation info loss after set_ringparam is called")
Signed-off-by: Kevin(Yudong) Yang <yyd@xxxxxxxxxx>
Reviewed-by: Eric Dumazet <edumazet@xxxxxxxxxx>
Reviewed-by: Neal Cardwell <ncardwell@xxxxxxxxxx>
CC: Tariq Toukan <tariqt@xxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/net/ethernet/mellanox/mlx4/en_ethtool.c |    2 +-
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c  |    2 ++
 drivers/net/ethernet/mellanox/mlx4/mlx4_en.h    |    1 +
 3 files changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
@@ -47,7 +47,7 @@
 #define EN_ETHTOOL_SHORT_MASK cpu_to_be16(0xffff)
 #define EN_ETHTOOL_WORD_MASK  cpu_to_be32(0xffffffff)
 
-static int mlx4_en_moderation_update(struct mlx4_en_priv *priv)
+int mlx4_en_moderation_update(struct mlx4_en_priv *priv)
 {
 	int i, t;
 	int err = 0;
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -3657,6 +3657,8 @@ int mlx4_en_reset_config(struct net_devi
 			en_err(priv, "Failed starting port\n");
 	}
 
+	if (!err)
+		err = mlx4_en_moderation_update(priv);
 out:
 	mutex_unlock(&mdev->state_lock);
 	kfree(tmp);
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -797,6 +797,7 @@ void mlx4_en_ptp_overflow_check(struct m
 #define DEV_FEATURE_CHANGED(dev, new_features, feature) \
 	((dev->features & feature) ^ (new_features & feature))
 
+int mlx4_en_moderation_update(struct mlx4_en_priv *priv);
 int mlx4_en_reset_config(struct net_device *dev,
 			 struct hwtstamp_config ts_config,
 			 netdev_features_t new_features);





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux