From: Guenter Roeck <linux@xxxxxxxxxxxx>
[ Upstream commit 415fa1c7305dedbb345e2cc8ac91769bc1c83f1a ]
The DWC2 documentation states that transfers with zero data length should
set the number of packets to 1 and the transfer length to 0. This is not
currently the case for inbound transfers: the transfer length is set to
the maximum packet length. This can have adverse effects if the chip
actually does transfer data as it is programmed to do. Follow chip
documentation and keep the transfer length set to 0 in that situation.
Fixes: 56f5b1cff22a1 ("staging: Core files for the DWC2 driver")
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
Link: https://lore.kernel.org/r/20210113112052.17063-2-nsaenzjulienne@xxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/usb/dwc2/hcd.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index e9ac215b96633..fc3269f5faf19 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -1313,19 +1313,20 @@ static void dwc2_hc_start_transfer(struct dwc2_hsotg *hsotg,
if (num_packets > max_hc_pkt_count) {
num_packets = max_hc_pkt_count;
chan->xfer_len = num_packets * chan->max_packet;
+ } else if (chan->ep_is_in) {
+ /*
+ * Always program an integral # of max packets
+ * for IN transfers.
+ * Note: This assumes that the input buffer is
+ * aligned and sized accordingly.
+ */
+ chan->xfer_len = num_packets * chan->max_packet;
}
} else {
/* Need 1 packet for transfer length of 0 */
num_packets = 1;
}
- if (chan->ep_is_in)
- /*
- * Always program an integral # of max packets for IN
- * transfers
- */
- chan->xfer_len = num_packets * chan->max_packet;
-
if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
chan->ep_type == USB_ENDPOINT_XFER_ISOC)
/*
--
2.27.0
