From: Linus Lüssing <ll@xxxxxxxxxxxxxxxxxx>
[ Upstream commit 12c8f3d1cdd84f01ee777b756db9dddc1f1c9d17 ]
When trying to set the noise floor via debugfs, a "data bus error"
crash like the following can happen:
[ 88.433133] Data bus error, epc == 80221c28, ra == 83314e60
[ 88.438895] Oops[#1]:
[ 88.441246] CPU: 0 PID: 7263 Comm: sh Not tainted 4.14.195 #0
[ 88.447174] task: 838a1c20 task.stack: 82d5e000
[ 88.451847] $ 0 : 00000000 00000030 deadc0de 83141de4
[ 88.457248] $ 4 : b810a2c4 0000a2c4 83230fd4 00000000
[ 88.462652] $ 8 : 0000000a 00000000 00000001 00000000
[ 88.468055] $12 : 7f8ef318 00000000 00000000 77f802a0
[ 88.473457] $16 : 83230080 00000002 0000001b 83230080
[ 88.478861] $20 : 83a1c3f8 00841000 77f7adb0 ffffff92
[ 88.484263] $24 : 00000fa4 77edd860
[ 88.489665] $28 : 82d5e000 82d5fda8 00000000 83314e60
[ 88.495070] Hi : 00000000
[ 88.498044] Lo : 00000000
[ 88.501040] epc : 80221c28 ioread32+0x8/0x10
[ 88.505671] ra : 83314e60 ath9k_hw_loadnf+0x88/0x520 [ath9k_hw]
[ 88.512049] Status: 1000fc03 KERNEL EXL IE
[ 88.516369] Cause : 5080801c (ExcCode 07)
[ 88.520508] PrId : 00019374 (MIPS 24Kc)
[ 88.524556] Modules linked in: ath9k ath9k_common pppoe ppp_async l2tp_ppp cdc_mbim batman_adv ath9k_hw ath sr9700 smsc95xx sierra_net rndis_host qmi_wwan pppox ppp_generic pl2303 nf_conntrack_ipv6 mcs7830 mac80211 kalmia iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm ftdi_sio dm9601 cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem ax88179_178a asix xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_ecn xt_dscp xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CLASSIFY usbserial usbnet usbhid slhc rtl8150 r8152 pegasus nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack
[ 88.597894] libcrc32c kaweth iptable_mangle iptable_filter ipt_ECN ipheth ip_tables hso hid_generic crc_ccitt compat cdc_wdm cdc_acm br_netfilter hid evdev input_core nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 l2tp_netlink l2tp_core udp_tunnel ip6_udp_tunnel xfrm6_mode_tunnel xfrm6_mode_transport xfrm6_mode_beet ipcomp6 xfrm6_tunnel esp6 ah6 xfrm4_tunnel xfrm4_mode_tunnel xfrm4_mode_transport xfrm4_mode_beet ipcomp esp4 ah4 tunnel6 tunnel4 tun xfrm_user xfrm_ipcomp af_key xfrm_algo sha256_generic sha1_generic jitterentropy_rng drbg md5 hmac echainiv des_generic deflate zlib_inflate zlib_deflate cbc authenc crypto_acompress ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common crc16 mii aead crypto_null cryptomgr crc32c_generic
[ 88.671671] crypto_hash
[ 88.674292] Process sh (pid: 7263, threadinfo=82d5e000, task=838a1c20, tls=77f81efc)
[ 88.682279] Stack : 00008060 00000008 00000200 00000000 00000000 00000000 00000000 00000002
[ 88.690916] 80500000 83230080 82d5fe22 00841000 77f7adb0 00000000 00000000 83156858
[ 88.699553] 00000000 8352fa00 83ad62b0 835302a8 00000000 300a00f8 00000003 82d5fe38
[ 88.708190] 82d5fef4 00000001 77f54dc4 77f80000 77f7adb0 c79fe901 00000000 00000000
[ 88.716828] 80510000 00000002 00841000 77f54dc4 77f80000 801ce4cc 0000000b 41824292
[ 88.725465] ...
[ 88.727994] Call Trace:
[ 88.730532] [<80221c28>] ioread32+0x8/0x10
[ 88.734765] Code: 00000000 8c820000 0000000f <03e00008> 00000000 08088708 00000000 aca40000 03e00008
[ 88.744846]
[ 88.746464] ---[ end trace db226b2de1b69b9e ]---
[ 88.753477] Kernel panic - not syncing: Fatal exception
[ 88.759981] Rebooting in 3 seconds..
The "REG_READ(ah, AR_PHY_AGC_CONTROL)" in ath9k_hw_loadnf() does not
like being called when the hardware is asleep, leading to this crash.
The easiest way to reproduce this is trying to set nf_override while
the hardware is down:
$ ip link set down dev wlan0
$ echo "-85" > /sys/kernel/debug/ieee80211/phy0/ath9k/nf_override
Fixing this crash by waking the hardware up before trying to set the
noise floor. Similar to what other ath9k debugfs files do.
Tested on a Lima board from 8devices, which has a QCA 4531 chipset.
Fixes: b90189759a7f ("ath9k: add noise floor override option")
Cc: Simon Wunderlich <sw@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Linus Lüssing <ll@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20210209184352.4272-1-linus.luessing@xxxxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/debug.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c
index 26ea51a721564..859a865c59950 100644
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -1223,8 +1223,11 @@ static ssize_t write_file_nf_override(struct file *file,
ah->nf_override = val;
- if (ah->curchan)
+ if (ah->curchan) {
+ ath9k_ps_wakeup(sc);
ath9k_hw_loadnf(ah, ah->curchan);
+ ath9k_ps_restore(sc);
+ }
return count;
}
--
2.27.0
