[PATCH 5.10 207/663] ata: ahci_brcm: Add back regulators management

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Florian Fainelli <f.fainelli@xxxxxxxxx>

[ Upstream commit 10340f8d7b6dd54e616339c8ccb2f397133ebea0 ]

While reworking the resources management and departing from using
ahci_platform_enable_resources() which did not allow a proper step
separation like we need, we unfortunately lost the ability to control
AHCI regulators. This broke some Broadcom STB systems that do expect
regulators to be turned on to link up with attached hard drives.

Fixes: c0cdf2ac4b5b ("ata: ahci_brcm: Fix AHCI resources management")
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Signed-off-by: Jens Axboe <axboe@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/ata/ahci_brcm.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c
index 49f7acbfcf01e..5b32df5d33adc 100644
--- a/drivers/ata/ahci_brcm.c
+++ b/drivers/ata/ahci_brcm.c
@@ -377,6 +377,10 @@ static int __maybe_unused brcm_ahci_resume(struct device *dev)
 	if (ret)
 		return ret;
 
+	ret = ahci_platform_enable_regulators(hpriv);
+	if (ret)
+		goto out_disable_clks;
+
 	brcm_sata_init(priv);
 	brcm_sata_phys_enable(priv);
 	brcm_sata_alpm_init(hpriv);
@@ -406,6 +410,8 @@ out_disable_platform_phys:
 	ahci_platform_disable_phys(hpriv);
 out_disable_phys:
 	brcm_sata_phys_disable(priv);
+	ahci_platform_disable_regulators(hpriv);
+out_disable_clks:
 	ahci_platform_disable_clks(hpriv);
 	return ret;
 }
@@ -490,6 +496,10 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 	if (ret)
 		goto out_reset;
 
+	ret = ahci_platform_enable_regulators(hpriv);
+	if (ret)
+		goto out_disable_clks;
+
 	/* Must be first so as to configure endianness including that
 	 * of the standard AHCI register space.
 	 */
@@ -499,7 +509,7 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 	priv->port_mask = brcm_ahci_get_portmask(hpriv, priv);
 	if (!priv->port_mask) {
 		ret = -ENODEV;
-		goto out_disable_clks;
+		goto out_disable_regulators;
 	}
 
 	/* Must be done before ahci_platform_enable_phys() */
@@ -524,6 +534,8 @@ out_disable_platform_phys:
 	ahci_platform_disable_phys(hpriv);
 out_disable_phys:
 	brcm_sata_phys_disable(priv);
+out_disable_regulators:
+	ahci_platform_disable_regulators(hpriv);
 out_disable_clks:
 	ahci_platform_disable_clks(hpriv);
 out_reset:
-- 
2.27.0






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux