From: Ayush Sawal <ayush.sawal@xxxxxxxxxxx>
[ Upstream commit 2355a6773a2cb0d2dce13432dde78497f1d6617b ]
The Max imm data size in cxgb4 is not similar to the max imm data size
in the chtls. This caused an mismatch in output of is_ofld_imm() of
cxgb4 and chtls. So fixed this by keeping the max wreq size of imm data
same in both chtls and cxgb4 as MAX_IMM_OFLD_TX_DATA_WR_LEN.
As cxgb4's max imm. data value for ofld packets is changed to
MAX_IMM_OFLD_TX_DATA_WR_LEN. Using the same in cxgbit also.
Fixes: 36bedb3f2e5b8 ("crypto: chtls - Inline TLS record Tx")
Signed-off-by: Ayush Sawal <ayush.sawal@xxxxxxxxxxx>
Acked-by: Jakub Kicinski <kuba@xxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/crypto/chelsio/chtls/chtls_cm.h | 3 ---
drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h | 3 +++
drivers/net/ethernet/chelsio/cxgb4/sge.c | 11 ++++++++---
drivers/target/iscsi/cxgbit/cxgbit_target.c | 3 +--
4 files changed, 12 insertions(+), 8 deletions(-)
diff --git a/drivers/crypto/chelsio/chtls/chtls_cm.h b/drivers/crypto/chelsio/chtls/chtls_cm.h
index 3fac0c74a41fa..df4451b306495 100644
--- a/drivers/crypto/chelsio/chtls/chtls_cm.h
+++ b/drivers/crypto/chelsio/chtls/chtls_cm.h
@@ -50,9 +50,6 @@
#define MIN_RCV_WND (24 * 1024U)
#define LOOPBACK(x) (((x) & htonl(0xff000000)) == htonl(0x7f000000))
-/* ulp_mem_io + ulptx_idata + payload + padding */
-#define MAX_IMM_ULPTX_WR_LEN (32 + 8 + 256 + 8)
-
/* for TX: a skb must have a headroom of at least TX_HEADER_LEN bytes */
#define TX_HEADER_LEN \
(sizeof(struct fw_ofld_tx_data_wr) + sizeof(struct sge_opaque_hdr))
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h
index cee582e361341..6b71ec33bf14d 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h
@@ -44,6 +44,9 @@
#define MAX_ULD_QSETS 16
+/* ulp_mem_io + ulptx_idata + payload + padding */
+#define MAX_IMM_ULPTX_WR_LEN (32 + 8 + 256 + 8)
+
/* CPL message priority levels */
enum {
CPL_PRIORITY_DATA = 0, /* data messages */
diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c
index 049f1bbe27ab3..57bf10b4d80c8 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c
@@ -2158,17 +2158,22 @@ int t4_mgmt_tx(struct adapter *adap, struct sk_buff *skb)
* @skb: the packet
*
* Returns true if a packet can be sent as an offload WR with immediate
- * data. We currently use the same limit as for Ethernet packets.
+ * data.
+ * FW_OFLD_TX_DATA_WR limits the payload to 255 bytes due to 8-bit field.
+ * However, FW_ULPTX_WR commands have a 256 byte immediate only
+ * payload limit.
*/
static inline int is_ofld_imm(const struct sk_buff *skb)
{
struct work_request_hdr *req = (struct work_request_hdr *)skb->data;
unsigned long opcode = FW_WR_OP_G(ntohl(req->wr_hi));
- if (opcode == FW_CRYPTO_LOOKASIDE_WR)
+ if (unlikely(opcode == FW_ULPTX_WR))
+ return skb->len <= MAX_IMM_ULPTX_WR_LEN;
+ else if (opcode == FW_CRYPTO_LOOKASIDE_WR)
return skb->len <= SGE_MAX_WR_LEN;
else
- return skb->len <= MAX_IMM_TX_PKT_LEN;
+ return skb->len <= MAX_IMM_OFLD_TX_DATA_WR_LEN;
}
/**
diff --git a/drivers/target/iscsi/cxgbit/cxgbit_target.c b/drivers/target/iscsi/cxgbit/cxgbit_target.c
index fcdc4211e3c27..45a1bfa2f7351 100644
--- a/drivers/target/iscsi/cxgbit/cxgbit_target.c
+++ b/drivers/target/iscsi/cxgbit/cxgbit_target.c
@@ -86,8 +86,7 @@ static int cxgbit_is_ofld_imm(const struct sk_buff *skb)
if (likely(cxgbit_skcb_flags(skb) & SKCBF_TX_ISO))
length += sizeof(struct cpl_tx_data_iso);
-#define MAX_IMM_TX_PKT_LEN 256
- return length <= MAX_IMM_TX_PKT_LEN;
+ return length <= MAX_IMM_OFLD_TX_DATA_WR_LEN;
}
/*
--
2.27.0
